SCOOTER BUILD-OFF

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yeah I almost finished the Frame!I got the swingarm stripped down ready to weld once I get the frame dialed in....
DSC00109.jpg
DSC00110.jpg
DSC00111.jpg
DSC00112.jpg
DSC00113.jpg
DSC00114.jpg
DSC00105.jpg
DSC00107.jpg
DSC00108.jpg
 
I hope it's cool that I started a second scootr
PB240003.jpg
I startes off with this 20" electra frame.
PB240007.jpg
Cut, weld, clank...
PB240008.jpg
Fit to my little girl. A couple hours later.
PB240010.jpg
PB250002.jpg
PB240014.jpg
So now it's father daughter Scootrz. :D
 
Heck Yeah I like the Father Daughter combo! 8) :mrgreen:
 
I get unplugged for a day and all this happens??!! :shock: :shock: :D
Your builds are looking great guys, keep at it!!! :wink:
 
Its my last day off and I finally got it into a roller!!! :D Its almost all welded up ,I still need to mount the pedal and make a deck but I wanted to make sure there were no suspension issues...And I rode it around the house and it works great just like it should, a little bouncy,but it doesnt bottom out and I have the front at 5" and the rear at 3 1/2"deck height and I can set it up alot stiffer so Im am stoked to say the least..
DSC00115.jpg
DSC00116.jpg
DSC00117.jpg
DSC00118.jpg
DSC00119.jpg
DSC00120.jpg
DSC00122.jpg
DSC00123.jpg
DSC00124.jpg
DSC00125.jpg
 
Dude, ya know what, I can see a bad ... diamond plate deck on this bad boy! They sell Diamond plate aluminum @ lowes or homie despot.
 
skulldady said:
Dude, ya know what, I can see a bad butt diamond plate deck on this bad boy! They sell Diamond plate aluminum @ lowes or homie despot.


I swear your reading my mind,I got a piece laying around I was getting ready to cut up and fit! 8) :mrgreen:
 
That thing is RAD!!! I don't usually use that word 'cuz it's kinda dorky these days, but I couldn't help it! It was all I could do to not cuss.
 
Got some 9-90 mounts welded up fer some stoppen.
PB270005.jpg
went with the 20"x3" front, and rear, got a deck from the local ckate shop 30$.
PB270003.jpg
blue break cables, and some odi clamp on grips...
 
Man that came out Sweet! I bet your daughter loves it!Thats a cool scoot for such a quick build too 8) :mrgreen:
 
Getting Closer!!!Today I got most of the welding and grinding done except for the deck mounts and peak but its close to being finished.I got the rear brakes figured out,ran a cable through the frame,Fit the pedal and it works great and pulls 7"! I got the swingarm all welded and ground down its about ready to paint...
DSC00128.jpg
DSC00127.jpg
DSC00129.jpg
DSC00130.jpg
DSC00132.jpg
DSC00131.jpg
DSC00134.jpg
DSC00133.jpg
DSC00135.jpg
 
skulldady said:
9-90's good choice are you gona put some Tektro breaks on em? I dig the cut out washer on the sprocket, keeps it looken klean.


Thanks, no tektro's but I got a set of undermount shimanos that should work good and I redid the cable mount because I melted the first one and the cable wouldnt fit inside of it.Now I just have to peak the bottom of the frame and its ready for mud and paint!
8) :mrgreen:
 
Oh yeah I finished the deck mounts !
DSC00136.jpg
DSC00137.jpg
DSC00138.jpg
 
skulldady said:
The tension builds, that looks menacing as it sits. Cant wait fer da pics with the deck on. Are ya going with the diamond plate?


Yeah im still gonna use diamond plate for the deck,I went to my local Hardware Store and they wanted 30 bucks for a thin piece 12" x 24" Dang thats way to much!!!The piece I have is twice as thick, its just not polished and I really didnt want to spend the time to polish it but I just might!Im making a template tonight and ill go from there! 8) :mrgreen:
 

Latest posts

Back
Top