SHOW US YOUR KLUNKERZ

[Rust_Is_Trust_513]

my glorious ride, ridden daily around 10 miles just for work. not included bar time afterwards. get a glorious ride to work though via a hiking trail...aka my mtb trail to work..

 

[rev106]

Cool klunkers!

 

[G-Matt]

That’s a cool Klunk with the banana on there. Just enough room for those closing time gals. [emoji1303]


Sent from my iPhone using Tapatalk

 

[Rust_Is_Trust_513]

That’s a cool Klunk with the banana on there. Just enough room for those closing time gals. [emoji1303]
thank you my man!

Sent from my iPhone using Tapatalk

 

[G-Matt]

The 41 Hiawatha in action .


Sent from my iPhone using Tapatalk

 

[Robertk]

OK, this is super bad!

@G-Matt that is one cool rig.

 

[gigmata]

I have been busy working in Santa’s workshop. The purple Spinsane has already been shipped out

This is what I am working on now. I originally wanted to call it “Sorcery”. The brakes, seat and grips are the only parts I intended to use on it. All the other cooler, carbon fiber parts didn’t fit including the Lauf Fork languishing in my garage. Luckily, the Big dollar Crank Bros. wheels can be used on something else.

Longtime readers of the forum will remember The Lucky B@$+@rd.

Sent from my iPhone using Tapatalk

 

[Dr. Tankenstein]

The 41 Hiawatha in action .


Sent from my iPhone using Tapatalk

Hey bud, what bars are those?


Sent from my iPhone using Tapatalk

 

[thunderbeard]

Hey bud, what bars are those?


Sent from my iPhone using Tapatalk

Mr Tick V Bars. I just ordered 2. Done by Feb. Get an order in with mine i suggest.

Sent from my LGMS550 using Tapatalk

 

[thunderbeard]

Mr Tick V Bars. I just ordered 2. Done by Feb. Get an order in with mine i suggest.

Sent from my LGMS550 using Tapatalk

Sick bars

Sent from my LGMS550 using Tapatalk

 

[Wildcat]

I've got the original bars on, the rust wasn't as bad as I thought. I can't find a good set of BMX bars, so I may fab up a crossbar that bolts on to get the look. The biggest improvement is the 3 piece crank conversion, that's the only way to go.

 

[thunderbeard]

I've got the original bars on, the rust wasn't as bad as I thought. I can't find a good set of BMX bars, so I may fab up a crossbar that bolts on to get the look. The biggest improvement is the 3 piece crank conversion, that's the only way to go.


View attachment 68340

View attachment 68342


View attachment 68343

I had a hard time finding a bolt on crossbar that didn't look all milled out and anodized. So I found this deal online took the bar off of the the middle bars put them on my cruiser bars it looks bitchin. But you have to wait till I get back from New Mexico to take a picture of it

Sent from my LGMS550 using Tapatalk

 

[Mark Sr.]

90s His & Hers Kona Humu... 18" cruisers.

 

[Speed King]

 

[Speed King]

Fleabay score: unridden, stored since new- Asylum Hank. The unridden part is all about to change.

 

[DeuceWheeler]

Fleabay score: unridden, stored since new- Asylum Hank. The unridden part is all about to change.View attachment 71213

Dang, that is one sweet frame!

 

[Speed King]

Dang, that is one sweet frame!

Yeah, it turned out to be a nicer bike than I expected. Has tabs for discs, 27.5 wheels, easy to do some performance enhancements.

 

[repedaler]

Fleabay score: unridden, stored since new- Asylum Hank. The unridden part is all about to change.View attachment 71213

That one of my Grail bikes, LUCKY!

 

[inlikeschwinn]

Here are some shots of my 2000 Schwinn
Stolen Mob Cranks
Raw 4130 bars from ebay
JCH Street PAN 400

 

[Simple.]

Hi all! Sorry I'm late to the party here! I built this last summer and rebuilt it again after I broke the frame hopping a curb. I blew my chin out and ended up with 13 stitches last spring due to the coaster brake, so it was time to upgrade. Haha. Second time around I reinforced the head tube, welded up some v-brake mounts, modified the 3spd internal hub to be a free wheel, changed the rear gearing, and relocated the 3 speed shifter to the frame.

I like these Worksman frames! Lol

Enjoy!

- Jon