SHOW US YOUR KLUNKERZ

[Dizzle Problems]

They work now. I would have to guess that is I didn't hit the like button when originally posted, they probably weren't displaying then.

What fork did you replace the tange with?

I think I posted it the day before the software change, so there was an issue with the pics.
I replaced the Tange with some Akisu. The bike was mostly bought for the Tange. I was fortunate to pick up the complete bike for less then I paid for my last pair of the same forks, so it was an easy buy.

And where did the Tange go?

In my fork pile. They’re destine for a greater build.

 

[MattiThundrrr]

the Tange ...are destined for a greater build.

 

[RustyGold]

And where did the Tange go?

 

[Nofriendzboy]

New member here, thanks for accepting my request! Hope everyone is doing well with what's going on in the world. Stay safe!

Here's a build I did a couple of years ago. Has a klunker/ rat rod vibe with a little bit of BMX flair sprinkled in.

Current set-up below. With extra time on my hands I decided to throw on the monark fork.

 

[MattiThundrrr]

Awesome!

 

[Nofriendzboy]

Awesome!

Thank you!

 

[Davo1970]

New member here, thanks for accepting my request! Hope everyone is doing well with what's going on in the world. Stay safe!

Here's a build I did a couple of years ago. Has a klunker/ rat rod vibe with a little bit of BMX flair sprinkled in.
View attachment 117300
Current set-up below. With extra time on my hands I decided to throw on the monark fork.
View attachment 117301

Looks killer!! Nice job

 

[Nofriendzboy]

Looks killer!! Nice job

Thanks man, much appreciated!

 

[Just Jeff]

Here is mine. Mid 30’s Shelby frame based

 

[MattiThundrrr]

 

[Chuy]

New member here, thanks for accepting my request! Hope everyone is doing well with what's going on in the world. Stay safe!

Here's a build I did a couple of years ago. Has a klunker/ rat rod vibe with a little bit of BMX flair sprinkled in.
View attachment 117300
Current set-up below. With extra time on my hands I decided to throw on the monark fork.
View attachment 117301

Do you mind sharing your brake set up? Curious on the adapter. Thanks.


Sent from my iPhone using Tapatalk

 

[Dr. Tankenstein]

New member here, thanks for accepting my request! Hope everyone is doing well with what's going on in the world. Stay safe!

Here's a build I did a couple of years ago. Has a klunker/ rat rod vibe with a little bit of BMX flair sprinkled in.
View attachment 117300
Current set-up below. With extra time on my hands I decided to throw on the monark fork.
View attachment 117301

That fork looks great on it!


Sent from my iPhone using Tapatalk

 

[FarmerJB]

my homemade budget klunker cruiser.....
Madwagon Hermosa frame for $50 off Nextdoor. stripped to frame,
chrome bmx ebay fork
repro bmx quill stem
bmx cruiser chrome bars off ebay
vans grips
Dia compe tech lever
Dia compe bulldog brake
Odyssey brake pads
Acs freewheel
SE racing 26" black aluminum rims
Brooks spring saddle
Maxxis hookworm tires (HUGE...barely clear the rear frame)
Porkchop bmx aluminum 44t sprocket
DK chrome crank
so far thats it.
it rolls great and seat is comfy as hell. im loving this bike

 

[MattiThundrrr]

Burly! The Maxxis look huge!

 

[FarmerJB]

they are! biggest

Burly! The Maxxis look huge!

tires i have ever seen on a cruiser lol i was a little doubtful they would work with brakes but i got creative and used some brake pads i found that are really tall to make the reach to the rims without touching the tire sides, but man the frame is like 1/16 or an inch clearance if that down by the bottom bracket area on back wheel lol if the rim comes out of true at all im gonna be a pedestrian!

 

[MattiThundrrr]

Some of the guys who run fatter tires than the frame will allow modify the stays to gain clearance. I think either @GuitarlCarl or @us56456712 have posted pictures of the tool they used, maybe they can share some wisdom

 

[Davo1970]

R.O.B. Regular Old Bike Company...fun bike that's long gone!

 

[Dizzle Problems]

R.O.B. Regular Old Bike Company...fun bike that's long gone!View attachment 117761

These frames are so rad! Kicking myself that I passed on one about a year back.

Been enjoying this one a bunch lately-

 

[ParkRNDL]

recycled last year's RRBBO project

 

[karl]

Spare-parts klunker: