Dan Jose Joined Aug 15, 2008 Messages 643 Reaction score 6 Location Brooklyn, NY Rating - 100% 5 0 0 May 15, 2010 #1 Dont know jack about skiptooth stuff, but do you guys know if a 10 tooth sprocket works well with a 26 tooth star? Thanks.
Dont know jack about skiptooth stuff, but do you guys know if a 10 tooth sprocket works well with a 26 tooth star? Thanks.
deorman Joined Apr 20, 2009 Messages 10,983 Reaction score 3,191 Location Fairfax, VA Rating - 100% 2 0 0 May 15, 2010 #2 That's a fairly common ratio. I'd say it's probably pretty close to the same as what you're used to, assuming we're talking 26".
That's a fairly common ratio. I'd say it's probably pretty close to the same as what you're used to, assuming we're talking 26".
sensor Joined Sep 27, 2007 Messages 7,775 Reaction score 766 Location sac. valley Rating - 100% 6 0 0 May 15, 2010 #3 thats the same as running a 20/52 1/2" pitch i run a 26/10 on almost all my bikes....its a work out to get moving but once start moving you can fly :mrgreen:
thats the same as running a 20/52 1/2" pitch i run a 26/10 on almost all my bikes....its a work out to get moving but once start moving you can fly :mrgreen:
Dan Jose Joined Aug 15, 2008 Messages 643 Reaction score 6 Location Brooklyn, NY Rating - 100% 5 0 0 May 16, 2010 #4 Thanks fellas.
Joeskustoms Joined May 15, 2010 Messages 179 Reaction score 0 Location Philly, PA Rating - 0% 0 0 0 May 16, 2010 #5 hey I'll be running a 26/9 skiptooth setup on my Kopper Kart build. is there much of a difference with this setup?
hey I'll be running a 26/9 skiptooth setup on my Kopper Kart build. is there much of a difference with this setup?