The Eliminators: Wife's Bike revamped

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: The Eliminators, 20” Wheels 28Feb12

Things are looking great!
Maybe I have had just a little to much coffee today :roll: .... But is this finalized tire combo? or are you going with the Jerald?
24inMockupII16Feb12.jpg


The wife's 20" tires look great!

Also I think the fork fire red will look great!

Stay cool and keep up the great work :mrgreen:
 
Re: The Eliminators, 20” Wheels 28Feb12

following this closely, just picked up a eliminator 20" frame. I can weld and was thinking of the same 24/20 combo!! Looks nice so far!!
 
Re: The Eliminators, 20” Wheels 28Feb12

Hey Guys,
SCHWINNRAY69 said:
I like 'em.... 8) 8)
Thanks Bud. Hopefully they are Big and Little enough for you :lol:
Skipton said:
Things are looking great!
is this finalized tire combo? or are you going with the Jerald?
The wife's 20" tires look great!
Also I think the fork fire red will look great!
Stay cool and keep up the great work :mrgreen:
Thanks for the comments and motivation Skipton! Yes, that is the final: Hoggy G (2.625") in back Specialized 1" in front.
Was shooting for the Jerald slick but then I found I could go fatter. Once there, I couldn't go back :lol:
Agree with you about the paint and am going to manage my expectations about matching and just get it done.
whopperchopper said:
following this closely, just picked up a eliminator 20" frame. I can weld and was thinking of the same 24/20 combo!! Looks nice so far!!
Thanks WC! Congratulations on your Eliminator frame!
With welding, you could add more to the dropout and put the 24" in a relatively straight forward way.
You can see (pic in middle of page1)where the plate might be added.
Even thought about dropping out the back like a modern single speed. I've got some sketches if you want to see them.
I'll be watching for your build thread. Good Luck!
 
Re: The Eliminators, 20” Wheels 28Feb12

Small update:
20" Bike:
Frame is being stripped yet. Made a 1/2" open wrench ground thin to rebuild the 20" recumbent wheel
Started taping it off for painting the rim. My wife is still thinking about the color for frame and rims
Sick of trying to figure out how to straighten the 24" fork and am pursuing another
24" Bike:
Going to my LBS for help with finding a BMX short crank set up where the chainline works (3rd try)
If that doesn't work then will install the Sugino 170mm cranks and live with it
Hopefully am going to get a lot more work done tomorrow but all boring detail stuff
Thinking should just put the 24" bike together and try everything, then tear it apart again

This has got to be one of the most dragged out builds I've done :?
Got another build in the works too and have been thinking a lot about the Buildoff...
Focus, Steve, Focus :lol:
 
Re: The Eliminators, 20” Wheels 28Feb12

MplsCoaster said:
This has got to be one of the most dragged out builds I've done :?
Got another build in the works too and have been thinking a lot about the Buildoff...
Focus, Steve, Focus :lol:

"Stay on target! stay on target!" :mrgreen:
 
Re: The Eliminators, Details Arghhh 9Mar12

aka_locojoe said:
THis is one of those builds that I'm anxious to see the end but hate for it to be over.
Skipton said:
"Stay on target! stay on target!" :mrgreen:
Thanks a lot guys. It's your support that keeps me going

Got over some hurdles with the 24” Eliminator last weekend.
Talked with the mech at One on One bike shop about any other options for the cranks. Pics of their "Junkyard":
viewtopic.php?f=1&t=53956
I think we exhausted almost all options without reaming out the frame tubes coming through the bottom bracket tube (like on the Spaceliner) which is way too much work. Found a 5.5” one piece crank in good condition for $6.
There still could be a BMX option but I’m tired of looking for now.
Just decided that this will never be a lightweight bike (with a 2 lbs rear tire) but will have multi speeds, so just get it done.

Found a different 24” fork that wasn’t bent or wrong. Went to ridiculous effort to drive and purchase a whole bike to get it.
But it was one of the defining features of the build.
I’ll post some pictures after I sand blast the pink paint off it, LOL. It has a nicer rake to it than the last one.

So did a dry assembly and really could have had it ridable if I would have lubed everything.
Getting much closer now and am now trying to decide the final parts (seat/sissybar/grips/pedals) that I want and can pull out of my parts bins.
Lots of details left but at least all the essential parts are done.

Thanks for looking
Steve
 
Re: The Eliminators, parts found 12Mar12

Thanks Kingfish. That bike is really cool and has a much bigger rear tire :shock:

Did work on frames today, gun bluing experiment for the buildoff
viewtopic.php?f=67&t=56493
And got some painting done on my wife's 20" bike and the 24" fork on mine
IMG_6286II.jpg

Just decide to go with the Fiery Orange Metallic whether it matched or not
May mock it up before clearcoat (stay tunned)
IMG6301II.jpg


Got my wife to decide on a color (which she had previous liked) :lol:
So Sunrise red, closest to cherry red I could find (quickly)
She's got a "cherry bomb" idea in her head :D
IMG_6312II.jpg

IMG_6315II.jpg


Still have some more coats to go before clear coat
I HATE waiting for paint to dry, so I took a little ride on the Triangle Roadmaster
IMG_6314II.jpg


Really nice day, And work done :D

Thanks for looking
Steve
 
Re: The Eliminators, paint applied 28May12

That's some nice paint :wink: I like how the orange looks bronze/root beer-ish! :mrgreen:
 
Re: The Eliminators, paint applied 28May12

Thanks Nick, I like it too but kinda sure it won't match with the stock paint on the 24"
If I was more talented, I might feather it in to the original paint
I'll be putting it together soon and update ya

So I got all the red on my Wife's 20" Cherry Bomb and started with clear.
I can't believe no fish eyes or runs (so far)
This was only my second paint job, ever.
First one in 1985 in the paint booth at the body shop at work :lol:
IMG_6417II.jpg


So it doesn't look great but reasonably okay.
I'm working on this one too because my Wife's grand nephew is coming into town
Not sure if he's big enough for the other 26" bikes

Looking forward to getting the Cherry Bomb together
First my way :lol: tall sissy bar, black nanar/grps/pedals and of course the Big and Littles :D
Then we'll have to modify it the way my wife wants "her" bike, Maybe white nanar/fork/seatpost decal

Thanks for looking
Steve
 
Re: The Eliminators, red done, clear starts, small update

First I'm going to catch up with a post I put into my RRB#7 Build:

17June:
I had to post a few pictures of the other bike that has to get done sooner (than JUP)
Got the paint done on my Wife's Eliminator so I took 6 hours straight to assemble it

The rear coaster hub is so loose it's almost unridable?!!!! (bought that way)
Like always, I'll have to go through it and make it work properly
The tire slightly rubs on the chain. Once I fix the sloppy factory hub settings I can see how big of a problem it is
IMG_6528III.jpg


I underestimated my wife's height :oops: :lol:
IMG_6531III.jpg


Dr T:
On the chain clearance, are you set on that front chainring? I had a Wald unit like it on my Fatbelly Bobber and had 'slight' rubbing too. I noticed that one on a Schwinn is 'dished' (see below). I flipped it so it dished out, it gave me about 3/16" clearance, no more tire rub....

Right you are DrT, thanks! By the time I got done with the long build up I wasn't thinking straight
My wife likes it because it's "different" but it needs to work
I was fighting 1 twisted crank, 1 bent crank, a bent chainring and the one that's on now it's exactly the most true either
61Jun12378II.jpg

I'll swap in one of the other dished ones, like you say.
The hub gear is sightly dished too
 
Re: The Eliminators, red done, clear starts, small update

Well now I'm caught up with this post.

Life is full of compromises and timelines. This bike hit both :roll:
My Grand nephew is coming this Saturday and I had to get it done

Took it all apart again, put the dished chainring and went through the hub
Tried to polish up the dull parts and cleaned up the pedals

Still had a clearance issue between the chain and 20X3 Innova, Arghhh!
Time to make it work, so I bought a Hook worm 20 (iso 406) x1.9 at my LBS (700g)
I wanted to go with a Schwalbe Big apple 26x2.125 (530g)
but they didn't have them in stock
IMG_6747II.jpg


The back tire looks too small. It's exactly the height of the front tire 20 (iso 451) x 1.25

But I have to tell you it's 1.5 lbs lighter and rolls really smooth. I actually really like how the bike rides
The Innova was way out of balance too, (shook the whole bike when testing the hub :shock: )
Maybe I'll have to order that Schwalbe but in the mean time it works! :D
My wife likes how it rides smooth but she had to get used to the ape hangers :lol:
IMG_6746II.jpg



Thanks for looking (for so long without results)
2 bikes to get done before the 24" Eliminator gets done
Steve
 
Re: The Eliminators, Wife's bike done (for now)

Whoa...I missed a major update last time! :shock: Bike looks awesome :wink: That fat tire is cool!! 8) You have to figure out a way to put it back on :p
 
Re: The Eliminators, Wife's bike done (for now)

Hey Nick, Thanks! I know what you mean about the fat tire.
I'll try a harder to make it fit :wink:
Thanks GCrank!

Went for a small shakedown ride today
Saw my bike mechanic friend and he took it down the block
He thought it rode really smooth too :D
We were looking to see if a deeper offset hub gear would fit
He agreed with me that there wasn't much room for it

So I continued towards the river and stopped off at Dowling Community Garden (est 1943)
Some of the vegetables were already getting big
IMG_6749II.jpg


Then down to the river where I took pics of Mag Ray
IMG_6753II.jpg


It seems to be okay for my nephew to ride and a tighten check
So my wife already started thinking about embellishment
I asked if there were too girlie, could they wait a bit longer :lol:
(The rear tire has to get swapped out too)
IMG_6754II.jpg


Just realized I forgot to put the headbadge on :oops:
Thanks for looking
Steve
 
Re: The Eliminators, Grand Nephew checks it out

Well I'm glad I got things sorted out
My Nephew wanted to check out the bike He's going to have for the next couple of weeks
(Special circumstances for the parking lot ride only but we have a helmet from now on)

He says in rides smoothly. :D
He did well especially because it doesn't handle like his Diamondback BMX

IMG_6767II.jpg


Got some speed and tight corners down great
IMG_6770II.jpg

Did a nice photo too (Of me :lol: )

Took the Spaceliner out for a bit and we did Figure8s trying to not (mock) hit each other :lol:
IMG_6771II.jpg


It was a good day!
Thanks for looking
Steve
 

Latest posts

Back
Top