The Fake Jaguar Thread

[Ulu]

Today I got my new gas tank support stripped, sanded, and ready to weld in place.

Then I made a couple 1/8” frame gussets that notch in under the new crossmember, right where the frame kinks in on each side.

I prepped the floor and crossmembers for more sheet metal welding.

I’ll get all that stuff welded in place tomorrow.

 

[Ulu]

By the way, congratulations to @Pondo and the @Shrunken_Head_Pedaler!

 

[Pondo]

By the way, congratulations to @Pondo and the @Shrunken_Head_Pedaler!

Thanks Ulu!

 

[Ulu]

I got these little gussets welded on today.

I think that tank of “bad gas” was actually wet gas.

The new gas worked crappy, then ok, then crappy, then ok.

I laid out all the gas hose to slope downhill, then purged the hose 15 seconds. Problem solved

I would have done more, but today was Christmas tree shopping day. I got a lovely tree but the trunk was 1” too thin to bolt into my stand.

I ended up making 5 little “shoes” for the clamping bolts from scrap tubing.

Problem solved.

 

[Ulu]

I made two more gussets and hot them welded down.

I have got most of the floor welding done now. I also got the fuel tank support welded on.

I need to roll the chassis to finish up a few more pan welds. Also I still have a few welds to repair.

 

[Kevin B]

Ulu, this looks like a machine weld. Outstanding.

 

[Shrunken_Head_Pedaler]

By the way, congratulations to @Pondo and the @Shrunken_Head_Pedaler!

Thank you much!

 

[Ulu]

Ulu, this looks like a machine weld. Outstanding.
View attachment 284848

Thank you. It’s certainly not perfect, but I’m getting better at this with practice.