The Violet One

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jan 21, 2009
Messages
11,448
Reaction score
18,579
Location
Zambales, Philippines
Rating - 100%
8   0   0
My birthday bike showed up finally. The headtube has a dent and there are a few dings and scratches but nothing that can't be fixed.
08 Nov 24 new.jpg


08 Nov 24 headtube.jpg


I was going to make this a 700C bike, but I think the 26" wheels and whitewall 1.50 smoothies will work fine. When this is done, I'll start on the black frame just like it but use 700C wheels.

462542321_1322559499152901_6946502937165274435_n.jpg


With a 44 tooth chain wheel and an 18 cog, the 2 speed should be pretty fast. I calculated 61 and 84 for gear inches.

I've got a bunch of parts on order and hopefully are all the right size.
 
My favorite bike, Chrome Molly had the same problem, a dent in the head tube.
135579-Chromolly.JPG


I used a solid 5/8ths bar and gently tapped out the dent.
135581-Chromolly-repair.JPG


This one isn't as bad so I think it will be fine when I work on it tomorrow.
 
I had 20 dollars worth of parts show up at the same time. The spacers came with a headset but that wasn't shown on the ad. So I have an extra headset, one where the bearings sit inside the headtube. I'm using the external kind with sealed bearings on this bike.

09 Nov 24 parts.jpg
 
I tapped the dent out using a piece of water pipe and pressed in the new headset, 34mm.
10 Nov headset2.jpg
10 Nov headse presst.jpg


I've never used this kind of headset but it went together easily. I used most of my spacers and didn't have to trim the fork. I need the bars high so it works for me.
10 Nov headset.jpg
10 Nov headset3.jpg

The BB and crankset is due to arrive today.
 
The seatpost and handlebars needed trimmed down. The curve in the seat tube wouldn't let the stem drop in far enough and the bars were way too wide.
12 Nov 24 height.jpg
12 Nov 24 cutting.jpg

12 Nov 24 trimmed.jpg


Then I checked and I have brakes that will reach the 26" rims, but no spindle for a front brake but tons of all the other parts. So I ordered a front brake, same anodized red to match the hubs and spokes.
12 Nov 24 brakes.jpg
 

Latest posts

Back
Top