A Quest bso that got a tape treatment.
I removed the brakes, gears, ground off all the cable stops and brake mounts. A quick primer spray and paint on the bare metal. Rebuild the rear wheel with a coaster hub. angle grinder to remove the extra sprockets. (rivets).
replaced the seat post with a straight post. Added a fat seat.
The ride isn't good. Maybe the 40mph wind gusts had some effect.
Found the original photo.
This is touched up version with the crash test dummy idea.
Accumulating some of the evil white stuff:
More of it:
after:
I removed the brakes, gears, ground off all the cable stops and brake mounts. A quick primer spray and paint on the bare metal. Rebuild the rear wheel with a coaster hub. angle grinder to remove the extra sprockets. (rivets).
replaced the seat post with a straight post. Added a fat seat.
The ride isn't good. Maybe the 40mph wind gusts had some effect.
Found the original photo.
This is touched up version with the crash test dummy idea.
Accumulating some of the evil white stuff:
More of it:
after:
Last edited:
