=D---- Laprise E-BTR

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 25, 2012
Messages
2,715
Reaction score
4,130
Location
Montréal Canada (Québec)
Rating - 0%
0   0   0
Here i go again ,
this time iam set on building a replica of my dream bike : 1914 Cyclone BoardTrackRacer
i plan to motorize it ''Electric'',with curiously a motor named Cyclone, but ill want to build it as close to the original as possible while still being practicle .
cyclone.profile.jpg


i already started with the fork , wich is a 'Flying Merkel fork , the pioneer of the modern tellescopic suspension forks.


the original fork had no friction sleeves and a weird 3 part inner tube
merkel%20fork%20parts%20list_zpszm04n6od.jpg
Merkel%20blueprint_zpsqyxarvnn.jpg

so i decided to make it my own way ,more simple, more like a modern fork , with the return spring inside the inner tube , and the compression spring under the tubes
Merkel%20fork%20cut%20view_zpsb3z18zu3.jpg

made the inner tubes using plumbing pipes polished on the wood lathe, plumbing fitting as risers/top nut,
and nylon hose fittings for the friction sleeves .
DSCN7175_zpsdj73l6ka.jpg

-Using seat clamps as bar clamps , i welded a 3/8'' nut inside the top of the plumbing fittings...
-Capped a steerer tube topnut...
-Made the top plate by grinding 2 halfs with half holes and then welded togeter(cause iam not equipped to drill that big)
-Used one peice crank locknuts welded on the tubes to make a shoulder for the top plate...
DSCN7180_zps8tyyqclq.jpg

Made a groove for the nylon sleeves to lock on , used a hss boring bar and files on my wood lathe(i do with what i have)
DSCN7181_zpszjds7k6r.jpg

Ouuhh Yeah!:113: ive made new shorter riser wich look much cleaner , and top plate is done!
DSCN7182_zpsvw1b6uzs.jpg
DSCN7183_zpsmmu5krv5.jpg

not sure yet if i put the top sleeves fixed on the inner tubes or the outer tubes .
ill go get some tubing to extend the outer fork legs soon , at thats moment ill know what diameter to lathe the sleeves.
have to lathe everything and test the sliding action before i can weld the bottom support that joins the legs with the steerer tube and notch the outer legs
 
Last edited:
got some tubes for the outer legs finally , the ID is .900 so there is not much room between the 2 tubes , but manage to make the sleeves super thin and i really satisfied with the tight fit , original forks seem to use 1'' tubes also but i thought i would have to use bigger cause i dont have precision tools and ima using sleeves

cleaned the outside and inside of the tubes , inside have that anoying weld seem , but i mange to sand most of it off and made a small groove in the sleeve to clear it
DSCN7187_zpslgj8ggz2.jpg
DSCN7188_zpsxkhhy1sl.jpg

turned the bushing one half at the time , using duck tape to hold it :crazy:
with the hss boring bar first , then with sand paper and file for surprizing accuracy and finish
DSCN7189_zpstjsnemox.jpg

as you can see , i finally manage to un-freeze my point and aling the spindle wich was a pita but worth the effort and time , much more stable and safe turning now:)
DSCN7190_zps8cnn7srw.jpg
DSCN7192_zps1dgzyukv.jpg

i am set on putting the top bushing fixed in the outer tubes,
i tryied something but realized afterwards it wont work , the tread diameter is smaller than the tube so i wont be abble to slide the bushing in place:doh:
DSCN7191_zpslra6jcgo.jpg


some of these forks had a nut on top like i tried and fail , but some others of these forks have a clamp setup like a seat tube so iam just gonna make this simple like this: its gonna clamp a ring on top of the bushing to prevent it from slipping up
top%20bushing%20lock%20ring_zpstnwhmst3.jpg
:113:
 
no progress on the fork today , spent the day plowing 35'' of snow from the house and neigbor:whew::blackeye:

DSCN7194_zpsqxiwwmvl.jpg
DSCN7193_zpskt9zvno8.jpg
 
You can upload straight to the site on a computer or through Tapatalk with a phone.
 
You can upload straight to the site on a computer or through Tapatalk with a phone.
iam oldschool, i never owned a cell phone :confused:
 
hah! FaceBook as hosting site!:13: more simple and faster!


Progress!

Drilled and tapped a rod
1.jpg

2.jpg

17343026_991004944368048_409764013293167093_n.jpg
17342870_991005047701371_8326291793335894091_n.jpg

holding it in the lathe by a bolt and grinding it to size and concentric
3.jpg

17352458_991005227701353_4255643832934468481_n.jpg

welded to a handlebar piece
17309879_991005287701347_5024783968542066155_n.jpg

cleaned and turned to make a shoulder for the spring
5.jpg
4.jpg

17342743_991005451034664_7047790969203325074_n.jpg

6.jpg

Voila! the piece will go inside to join the 2 parts and screw the spring bolt

9.jpg
10.jpg

17353594_991005531034656_700886571546653103_n.jpg
17353537_991005574367985_7971402251935736103_n.jpg

1" to 1 1/8'' to donnor stem
17309842_991005621034647_8247361462733834721_n.jpg

boom! 2 nice clamps , also made the lock rings
17309664_991005651034644_1901382793320229329_n.jpg

:113:

next step is welding things togeter and turning the top sleeves
 
Last edited:
its not much , but welding/cleaning that part and turning and ajusting the bushings took me 4h:whew:
It slides and have no slop :dance2: so well worth it imo:nod:
DSCN7212.JPG

17353479_991628704305672_9080041066273914326_n.jpg
 
Last edited:
here is a good text i found about Joe Merkel fork
http://www.nationalmcmuseum.org/1928-harley-davidson-fhac-dirt-track-racer/
An innovation showing here is the motorcycle fork design. Patented by Joe Merkel as a “truss fork,” it can be seen as a predecessor of the telescopic fork and was a popular replacement for many racers. By 1912 road going Merkels were far ahead in innovation, had front and rear suspension and some of their innovations worked on the race track.

they were used on many brands of BTR

Flying Merkel
343701-1000-0.jpg

Harley Davidson
1928-HD-dirt-track_1-.jpg

Thor
ej0315-211616_3.jpg

Indian
1915_Indian_8-valve_board_track_racer_(1)_-_The_Art_of_the_Motorcycle_-_Memphis.jpg

Cyclone
IMG_2569Cyclone.jpg



What i really like about the cyclone is The fork and the color .
iam re-thinking the practical aspect of pedaling such a low bike .. might end up choosing to build a indian or HD frame by the time iam done with the front end , the other brands have a slightly higher seat tube and simpler tanks to make, like this cyclone wich is believed to have a indan frame
Cyclone-Board-$14111419$605.jpg



beautiful!:43:
also tinking of way to make the bars quickly ajustable for a better riding position without affecting the look to much and wich would look normal when parked:39:
 
Last edited:
i changed donner fork legs for ones with more curve and a little less bulky , it also have oval tube shape ,so it will end up looking more like the original.
DSCN7213.JPG

i made cuts front and back to stretch it to fit the upper tube

17353652_992192814249261_743765345457564181_n.jpg

mesure twice weld once! :nod:
17352381_992192500915959_8658959626013261056_n.jpg

DSCN7214.JPG
DSCN7216.JPG

alllot of things tho look at to make sure the forks end up straight with the right spacing , one is the clamps at the top had to be pointed inward ,so i make a little wood shim to hold them
DSCN7217.JPG

17352300_992192567582619_8648619960969409792_n.jpg

welded legs and soon to be truss rods
17342709_992192677582608_2738921300488638846_n.jpg

(on wheels and random frame) clearance looks good . 1 3/4'' suspension and 2'' clearance for the tires
17361695_992192554249287_4515303481086810373_n.jpg

even the little bump is like the original :)
DSCN7219.JPG
DSCN7220.JPG

17361712_992192847582591_103306911637413754_n.jpg

manage to get the tires i wanted , but now i personally name them the most expensive bicycle tires ever :speechless:
 
Last edited:

Latest posts

Back
Top