RRBBO13 ♠♣♦♥'SIMPATICO'♥♦♣♠

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
:acute::rofl:
giphy-preview.gif

Yo sooooo funny...
 
After getting a nudge from OddJob,I spent all day welding and chopping.
I first started with this frame,in the end I just wanted the rear end.
36227770_10155843677909811_5227066772229718016_n.jpg

I started by chopping off the rear drop outs. I need to extend them by 3cm in the end I think I added a extra 5cm. The frame was for a 24" but I did notice that it also fitted normal 26" wheels, just not ones running on 3" tires.
36189023_10155843673284811_3015848523976409088_n.jpg

Oh yes I did.
I found this scrap trolly and I knew the metal would come in handy.
36199937_10155843677134811_2868327044582735872_n.jpg

Spent all day trying to line up the rear wheel,then understood nothing on the red frame was straight from the start.
36236171_10155843672334811_1478792518874169344_n.jpg

Another scrap bike,that has donated a bit of itself. And a part off another.
36189014_10155843673629811_9105096475838251008_n.jpg

Here is a few mocks,everything is taped together with tape...
With the green tank shell.
36002431_10155843677569811_5949911151125987328_n.jpg

with the round simpson tank.
36188965_10155843678719811_4529158118755532800_n.jpg

with out,
36277506_10155843670794811_5104975111295860736_n.jpg
just throwing around ideas,getting the measurments set up.
I want the bike to be tall as I hate riding squashed,and the saddle will be in fixed position. So it has to be all set up...
The red tank was the original tank I was going to build with last year,but now I will make a fiberglass one.

I certainly would win the award for Frankensteining a bike.
All together so far are 6 different parts from bikes and 1 trolly.:D
 
Glad that OJ nudged you. I love watching you cobble together "junk" pieces into FunkPieces
 
For some reason I like the red tank (not sure why) but I'm more interested in seeing your fiberglass tank!
Red tank is nice but bulky. Will see how I get on.I also have to make some thing at the back. I enjoy the fiberglassing,just not the sanding.
Also the red tank gives me the height that I want. The seat should stan at 100cm off the ground, I need 87cm from pedal to seat going on my daily rider.
The bike will be a little supersized.
 
Last edited:
So this is my daily rider at the moment. Fully loaded with a picnic to the beach for 14 adults and 4 kids.
36265020_10155845836864811_8024666743513284608_n.jpg


36323677_10155845841499811_6245456105690890240_n.jpg

Now I have 2 days off so back to welding the frame.
 
Nice rig there!
 
That's a cool frame and guard. I love the pedals. I am a fan of the flats.
Rockbros pedals,I paid
$10 at auction off ebay... Excellent non slip and wide. Downside is they love to peel layers off the shins.:D
 
I have been trying to find time to get this frame done.My 2 day off turned into 1...
At the last minute I decided to change the tubing style.
I thought better to do a version of my own design .
Then I remembered why I had used the round in the first place. DOH!!!:headbang:(That was to keep the frame light as possible...)

I started by chopping up this.
36630742_10155863320614811_7620692221414604800_n.jpg

To get to this
36729122_10155863320339811_4406403898986725376_n.jpg


36688175_10155863413539811_2521051287701684224_n.jpg


I need to have at least this frame welded and grinded by Monday.
Was expecting more days off.
And welding in this heat is crazy...
So if the frame is not done by end of next week?
I did start shaping part of the tank.
Maybe I can get all that ready,fenders etc(the small stuff)
I need a whole day or 2 for the frame and bits for the frame...

Not to sure on the middle bar yet, but 90% chance it will go.
 
Last edited:
Running a bit behind... But here are some updates...
I quit with the frame and started working on the lower part of the tank.
I used building foam wrapped in foil and then just tape.
37126052_10155880180189811_3953445438085922816_n.jpg

The under part shaped so the bar sits inside neat.
37028798_10155880182629811_1538334964758609920_n.jpg

Curing
37026876_10155880183519811_1299331377744838656_n.jpg

Another donar went into this build.
37023022_10155880187129811_3304113573399101440_n.jpg

Chop chop chop.
37107654_10155880179934811_331216586398498816_n.jpg


A little mock. Tested for height,looks like a winner. Seat is slightly back.
Could be moved forward.
37129465_10155880182954811_214533049499516928_n.jpg

The frame is sitting straight and all tacked up...
Today will be spent welding and grinding.
I believe at this point the prince bar will come out...
A. just extra weight
B. I can put 2x h20(or beer) bottle racks, in that space.
OR maybe some sort of tool canister/money holder.
I often cycle without pockets,so need something for phone and coinage.
37129437_10155880176639811_1727791839110496256_n.jpg

A shot without the prince middle bar
37129437_10155880176639811_1727791839110496256_n.jpg

:39: with or without.
I feel a tune in my head..,
 
The top tube with tank is a bit 'lost' in the photo, but I think once you have that all painted up and tied together, you will have the look.
Dig the sweet whitewalls too! WeLd oN~!
 
You Kwazy Wratter!! This bike is killer. Loving those forks and tires. I'm watching...GTB!! Peace

Sent from my XT1080 using Tapatalk
 
Back
Top