RRBBO13 ♠♣♦♥'SIMPATICO'♥♦♣♠

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Oops, :oops: guess I should've said "We are cheering you on!" :21:
It's yr lil quirky jokes,they made me spur on.... I know I have started 4 times to build to end up with nothing in the end. Life has just thrown me a bone in the wrong direction. I must say, now that I think back when I had no work or a pot to p---- in.(greek market crash) I had all the time in the world...
Working on getting back thr.
 
Today I finished welding the frame. Yeah!
Up next is fill,sand and primer.

Last night at midnight I started working on the saddle.
Going with a old lepper primus saddle from Germany.
Cost like $20 a few years ago,fits the build perfectly.
37667208_10155899813459811_5228683659912937472_n.jpg


Needed some TLC,so I scraped it with a wire brush and sanded by hand until I it had a nice velvet feel about it.
37638960_10155899813624811_5403557449552625664_n.jpg

Then rubbed in a thick amount of mink oil
37671850_10155899817064811_8290397877650325504_n.jpg

And wrapped in cling wrap so it would not dry out to quick.
37639583_10155899814934811_4765811151772581888_n.jpg
 
Cool seat rehab tips.
 
Yeah, cool technique on that seat rehab. And glad to hear the welding came together!
 
Last edited by a moderator:
speedracer.jpg
 
Grabbed my little box of goodies out of a dark corner.
37798980_10155908048489811_4712099197006905344_n.jpg

The grips i hope to use.
37814045_10155908047879811_5612923782244073472_n.jpg

The headlight.
37921575_10155908047579811_4137132745430138880_n.jpg

The tail light
37809337_10155908047699811_8108684945297244160_n.jpg

The rack bag,I think I will use the single one...
These are old ammo cases.
37869725_10155908048099811_3310883382455435264_n.jpg

Last few days been working at a slow pace.
But managed to fill,sand,prime and spray black.
I found a metallic black but once I sprayed it,came out dark grey...
Was not the look I was after.
37944242_10155909373409811_4206678887406501888_n.jpg


37907290_10155909374049811_2571058489577177088_n.jpg


37844274_10155909374324811_3334666158266646528_n.jpg


37866845_10155909373459811_6454421387221139456_n.jpg

Inbetween all this we had rain.??? What yes we have never had rain in the middle of summer here. So I had to respray everything. I also did the spring and while it was wet,dropped it in the dirt. DOH!!!
Now I need to varnish all.
Working on the rear gears,need to make a 4 gear out of a 6 or 5 gear.
A rack
Finish the fiberglassing
Handlebars and stem.
Top of tank.
Shocks and a few smaller things.
 
Nice doodad goodies. Those lights are killer.
Glad you are making progress. Just think of dropping the painted spring in the dirt as a fauxtina process. @The Renaissance Man has Col. Mustard, you use the Pig Pen technique. :D

FrayedFelineIsopod-max-1mb.gif
 
Not to go back in time, but do you know what model of Yamaha that tank is from in your mockups?Cheers!
I will have to go up and check,but I believe it is Yamaha-Virago-XV-535-XV535.
Mmmm I think you have figured out what I am doing.
 
Hahahahaha! Hardly, I’m looking for a tank for a build I’m gathering parts for....


Sent from my iPhone using Tapatalk
What sort of tank are you after? have few types in storage.
 
Yesterday I ploughed right into the build.
I felt like I had some progress. Then the frame fell off the .A few marks on the patina,will touch them up at last minute now.
Like one step forward 2 steps back.:D

kingfish254 this one is for you.
20180727_162131.jpg


So I have been pulling gears apart and finding different ratios. We have hills here,so I want the pedaling to be easy so I mixed up a 6speed gear to a 4 speed(the shifter is only set up for a 4). I am using a mega range to start with.
20180727_173228.jpg

I needed to pull the gear outwards so that the chain does not rub onto the shocks( I might need to run a chain guide somewhere.)
20180727_173250.jpg
So just grinded one gear down.
20180727_173310.jpg
If the gears are to easy,I can always make them higher.
Cleaned and painted.
And yes I know,gloves,but I cant work with them.
20180728_144126.jpg

A little sneak peak.
20180727_124820.jpg
20180727_124824.jpg
 
Last edited:
Back
Top