TRADITIONAL 🅵🅾🅾🅻🅸🅶🅰🅽 - 1930s Elgin Oriole - 2nd Place (Tie) - BUILD JOURNAL

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Had to use some clamps to squeeze the sidewalls of these fatties to allow them to pass by the shoulder bolt nuts. Then once the wheels where locked down, I had to slowly lower the tire pressure until the tires had enough clearance for riding.

1000023413.jpg
1000023414.jpg
1000023416.jpg
20240721_135445.jpg
 
Stole Queenfish's blow dryer to heat up the RatFink badge to widen it's radius. Then clamped it into place while it cools down. It has 3m double side mounting pad on the back.

1000023418.jpg
1000023419.jpg
1000023420.jpg
 
20240721_143414.jpg
20240721_143533.jpg
 
Painted the stem flat black

20240721_145537.jpg
 
Installed the black stem.

1000023426.jpg
1000023427.jpg
1000023428.jpg
 
This whole build, I've been riding this 90 year old saddle with only one seatpan clip. On the last ride, the second one broke. I was able to keep riding though. I was shocked at how easily the nuts broke free without any pb blaster. Gonna stop by ACE to find some replacement clips tonight.

I've contemplated some patina paint scheme for the saddle, but I truly love it's natural state. It is really comfy too.

1000023429.jpg
20240721_153229.jpg
20240721_154013.jpg
 
Maybe just a tad of Zinsser Amber Shellac (or similar) on the white parts of the fork shroud to 'creamatize' it to the color of the tank color.

Really like the HotWheels work and how it fits in! And the Rat Fink head badge is $$$ !

I'm going to hold off on any more aging until I see how the complete package plays off of each other.
It was fun doing the HotWheels and the B&M. RatFink badge is now installed and it's perfect!

'Ride-tuned' tire pressure. Dig it. I actually have the PSI written down in the BACK40 for a couple of my rides. A tire filling out a frame is one of the coolest aspects of a custom build for me!

These tires are so thick and fat, it truly doesn't take much air for them. Also, even at low pressure, you don't feel like they are dragging. They roll very well for fat tires.

Very envious of the chubby rubber, my friend. I wish Schwinn had made them more widely available. What were buyers expected to do once their original tires wore out? Buy a brand new bike, I guess.

Been wanting a set of these for quite awhile. I'm impressed with them too. It was worth the work to make them work on the rear. I'm so glad they work with this fork too.
 
After dinner, I mounted the chainguard and put the HotWheels badge on (still with temporary tape). Went for a dusk ride to get the feel for everything again.

 
In my short 30 minute ride, I had to stop and talk about my bike to 4 different people that came up to me. I always enjoy these interactions. Sometiimes they are locals, other times tourists. Young, old, men, women. Tonight one set college girls did the "cool bike, did you build that?" as I was taking the first fountain pic, after I said thanks and told them it was 90 years old, they circled back and wanted to know the details. As the left, one of them said, "I appreciate your art." What an awesome compliment from an art student.

1000023435.jpg
1000023437.jpg
1000023438.jpg
1000023439.jpg
1000023440.jpg
1000023482.jpg
1000023489.jpg
1000023486.jpg
1000023487.jpg
1000023488.jpg
 
Last edited:
Okay, I could pretty much call this build compete (and probably should with only 8 days to go), but 10 days ago, I pulled out a bunch of goodies to test mock to make sure I wasn't missing anything. Almost all of it didn't peak my interest, but this Higgins skirtguard did. But I still had so much more to do, so I scrapped the idea.
Here is the very simple mockup I did.

1000023001.jpg
 
Well, here goes nothing. I have a set of spare wide fenders from my fat Michael Blast Greaser bike, so the fit the tries we'll. First serious mockup fits well. Meshes well with the chainguard and the frame.

What fo y'all think of the flow?

1000023516.jpg
1000023517.jpg
1000023518.jpg
1000023519.jpg
1000023520.jpg
1000023521.jpg
1000023522.jpg
1000023523.jpg
1000023524.jpg
1000023525.jpg
1000023526.jpg
1000023527.jpg
1000023528.jpg
 
Would you try to carry the red and white used on the front end to the skirt? Cuz that might work. I guess I've gotten so used to focusing on that great tank /fork / front end that my immediate reaction is that the skirt is a little distracting.
 
Skirts yes but that fender would be better without the duck bill

Good idea. Think I find a scrap ballooner fender and cut it right at the end of the skirt points. Similar to what I did on Western Sizzler but without the scallops.

FB_IMG_1721752713102.jpg
 
Would you try to carry the red and white used on the front end to the skirt? Cuz that might work. I guess I've gotten so used to focusing on that great tank /fork / front end that my immediate reaction is that the skirt is a little distracting.


I was looking at that. The paint is slightly more creme than the tank but may work. Then I would paint the blue parts red along with the fender.

But I am thinking I would do less of the patina matching. Not as many voids as the frame and fork
 
Well...I don't ℎ𝑎𝑡𝑒 it. I imagine what paint finishes you choose would have a big impact on the final appearance, so it's hard to judge from a mock-up.

Appreciate any input. I mentioned my paint scheme idea in my reply above to OJ.
Here is a very rough idea of that. Of course the red wouldn't be brght, but instead the same satin colonial red I've been using.

1721755812542.png
 

Latest posts

Back
Top