TRADITIONAL 🅵🅾🅾🅻🅸🅶🅰🅽 - 1930s Elgin Oriole

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have a vise just like that green wood worker's bench vise. Made to be bolted to the side of the workbench. That way it is clear of wood moved around on the bench.

My favorite use for them is as a sheet brake for folding metal brackets and fab parts.
 
I've used this stuff on most of my builds since then. It's stiff and strong, but not too hard to cut and shape.

View attachment 271966View attachment 271967

giphy.gif
 
Hope Queenfish knows how much I appreciate how she decorated my workshop. :D

20240704_124343.jpg
20240704_124419.jpg
 
Sheet brake vise.

1000022558.jpg
1000022559.jpg
1000022560.jpg
 
Even used it with a seatpost to make the wrap for the downtube.

1000022561.jpg
1000022562.jpg
1000022563.jpg
 
I have one those great for shims for headtubed and such

I need to find another one. I think I am down to one last strip. Just did a quick search on fb marketplace, and all of the folding beds have different newer suspension than this old good stuff.
 
Put the new bracket in place. Did some alignment. Clamped it down. Did some markups on the bracket. Now I can remove it and start my drilling and cutting.

1000022564.jpg
1000022565.jpg
1000022566.jpg
1000022567.jpg
1000022568.jpg
1000022569.jpg
 
Got the front bracket all drilled up and mounted. I'll trim the extra up top later.

1000022570.jpg
1000022573.jpg
1000022571.jpg
1000022572.jpg
 
For the rear bracket I am going to temporarily use this flattened out brake arm holder.

While connecting all of this, I needed to remove the shifter housing only to find the set screw that secures it stopped out on me. So I replaced it with another that I have.

1000022574.jpg
1000022575.jpg
1000022576.jpg
1000022577.jpg
1000022578.jpg
1000022579.jpg
1000022580.jpg
1000022581.jpg
 
1000022661.jpg
 
1000022676.jpg
 
Had a good hour ride after I bolted up the chainguard. Surprisingly, I didn't have to adjust the guard at all during the ride. No sounds or clearance issues at all. Got some good Fourth of July pics.


1000022583.jpg
1000022584.jpg
1000022595.jpg
20240704_170139_01.jpg
20240704_170601.jpg
 
Had fun with the Cathedral puddle.

20240704_204722.jpg
20240704_162044.jpg
20240704_162138.jpg
20240704_162316.jpg
 
Red Necks, White Socks, and Blue Ribbon BEER

20240704_162544.jpg
 
Chippewa Square with our colonial founder General James Oglethorpe.
Followed by an English pub.
Then on to Madison Square and our Sargent Jasper Monument who saved the American colors during the Siege of Savannah in 1779 against the British.

20240704_163259.jpg
20240704_163044.jpg
20240704_163650.jpg
 
My Samsung has a Single Take feature where you do a 10sec video, then it kinda randomly applies different edits. In this case I did a walkaround video and it made what it calls a highlight reel.

 
The Single Take feature also randomly grabs pics from the video and either crops them or filters them or makes different videos from a clip. Here is a mix of regular pics and Single Take pics.

1000022680.jpg
1000022675.jpg
1000022663.jpg
1000022662.jpg
1000022651.jpg
1000022638.jpg
1000022632.jpg
 
Back
Top