• If you have bought, sold or gained information from our Classifieds, please donate to RatRodBikes and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD 1940's J.C. Higgins Skirt Guards 26" Balloon Fender Chainguard Rear Carrier tailight Pee Wee Herman

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 18, 2008
Messages
360
Reaction score
94
Rating - 100%
8   0   0
Please PM direct with all replies do not post them here to avoid confusion. I will answer PMs in order and mark it sold once paid in full. Thank you.

Buyer pays lower 48 USA shipping.

Complete set up for 26" balloon tire J.C. Higgins bicycle. One fender brace is broken and was repaired with a piece of stainless. The fender has the tombstone reflector and the carrier has the tailight housing. The front bracket to mount at seat post clamp is there but needs to be re-welded in place. $150. + shipping as shown.

The front 26" balloon fender is straight, front braces is not riveted in place $35. + shipping as is

Truss rods from 26" ladies J.C. Higgins with mounting brackets both top and bottom pieces. These are nice and straight. $35. + shipping
 

Attachments

  • IMG_1445.JPG
    IMG_1445.JPG
    218.6 KB
  • IMG_1446.JPG
    IMG_1446.JPG
    197.6 KB
  • IMG_1447.JPG
    IMG_1447.JPG
    162.5 KB
  • IMG_1448.JPG
    IMG_1448.JPG
    208.5 KB
  • IMG_1451.JPG
    IMG_1451.JPG
    199.7 KB
  • IMG_1452.JPG
    IMG_1452.JPG
    188.5 KB
  • IMG_1449.JPG
    IMG_1449.JPG
    196 KB
  • IMG_1450.JPG
    IMG_1450.JPG
    151.9 KB
Please PM direct with all replies do not post them here to avoid confusion. I will answer PMs in order and mark it sold once paid in full. Thank you.

Buyer pays lower 48 USA shipping.


Complete set up for 26" balloon tire J.C. Higgins bicycle. One fender brace is broken and was repaired with a piece of stainless. The fender has the tombstone reflector and the carrier has the tailight housing. The front bracket to mount at seat post clamp is there but needs to be re-welded in place. Was $150. Now $125. + shipping as shown.

The front 26" balloon fender is straight, front braces is not riveted in place $35. + shipping as is

Truss rods from 26" ladies J.C. Higgins with mounting brackets both top and bottom pieces. These are nice and straight. $35. + shipping
 
Back
Top