STBO A Ladies RoseMaster

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 24, 2007
Messages
1,813
Reaction score
3,836
Location
Iowa
Roadmaster Mt Climber with a rose to purple fade paint job.

2 x 5 speed index thumbies. Looks to have very low miles.

verifying date codes:
Lee Chi brake levers copywrite 1991, 97
brake calipers 97
Shimano front derailleur dated UL 1996 December
Shimano 5 speed freewheel UJ 1996 October

so perhaps a 1997 model year.



Img_3402.jpg

RoadMaster.Mt.Climber (2).JPG

some earlier Roadmaster builds:
53832681841_1e9795cdfb_b.jpg


44304900072_818c803413_b.jpg


52963028006_428da9f7ef_b.jpg


49814827503_bfb3aa056e_b.jpg
 
Last edited:
Todays progress.

bike dismantled.
freewheel, rear hub brake levers, brakes, derailleurs, sprockets into the parts bin.
The dual sprocket was stamped from a single piece of steel. No reducing that to 1 sprocket.
cranks are 165 so I'll be looking for longer cranks and a suitable sprocket.
wheels unspoked.
Yikes the steel rims are heavy.
1040 grams & 1015 grams.
after washing, 1010 and 1000. They didn't look that dirty. Perhaps I scrubbed off 20g of paint in prep for painting. The average boxmart aluminum rim is 400 grams. I have 1 on hand, will have to fetch another tomorrow. Aluminum rims will be nearly 3 pounds of weight reduction.
The stock tires are 1.75 and are more like 1.5" Nobbies. May look for some thing smoother and lighter.

Img_3403.jpg


Cable stops ground off. brush primer. I got a couple small bottles of paint that are similar in color for touch up.
IMG_3405.JPG
IMG_3404.JPG


White primer and paint for the rims.

headset cups factory painted. Cheaper than zinc plating?
IMG_3408.JPG

Decals heat gun removed.

IMG_3354.JPEG


Big welds. Look like they were squeezed out of a toothpaste tube.
IMG_3407.JPG
 
Last edited:

Latest posts

Back
Top