STBO A Ladies RoseMaster

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 24, 2007
Messages
1,816
Reaction score
3,842
Location
Iowa
Roadmaster Mt Climber with a rose to purple fade paint job.

2 x 5 speed index thumbies. Looks to have very low miles.

verifying date codes:
Lee Chi brake levers copywrite 1991, 97
brake calipers 97
Shimano front derailleur dated UL 1996 December
Shimano 5 speed freewheel UJ 1996 October

so perhaps a 1997 model year.



Img_3402.jpg

RoadMaster.Mt.Climber (2).JPG

some earlier Roadmaster builds:
53832681841_1e9795cdfb_b.jpg


44304900072_818c803413_b.jpg


52963028006_428da9f7ef_b.jpg


49814827503_bfb3aa056e_b.jpg
 
Last edited:
Todays progress.

bike dismantled.
freewheel, rear hub brake levers, brakes, derailleurs, sprockets into the parts bin.
The dual sprocket was stamped from a single piece of steel. No reducing that to 1 sprocket.
cranks are 165 so I'll be looking for longer cranks and a suitable sprocket.
wheels unspoked.
Yikes the steel rims are heavy.
1040 grams & 1015 grams.
after washing, 1010 and 1000. They didn't look that dirty. Perhaps I scrubbed off 20g of paint in prep for painting. The average boxmart aluminum rim is 400 grams. I have 1 on hand, will have to fetch another tomorrow. Aluminum rims will be nearly 3 pounds of weight reduction.
The stock tires are 1.75 and are more like 1.5" Nobbies. May look for some thing smoother and lighter.

Img_3403.jpg


Cable stops ground off. brush primer. I got a couple small bottles of paint that are similar in color for touch up.
IMG_3405.JPG
IMG_3404.JPG


White primer and paint for the rims.

headset cups factory painted. Cheaper than zinc plating?
IMG_3408.JPG

Decals heat gun removed.

IMG_3354.JPEG


Big welds. Look like they were squeezed out of a toothpaste tube.
IMG_3407.JPG
 
Last edited:
aluminum rims primed and drying.

crank options. I'll stick with the stock black crank. I have other bikes that would like the 175 bmx crank.

paint touched up on the frame. front hub repacked. hs & bb cleaned up.

aluminum.rims.primed.JPG
crank options.JPG
 
A bit of a disaster. Pink paint? Nope, runny clear with pink sparkles flying all over the place. Some landing on my car 20 feet away. It does work better on the piece of brick that I had on the outdoor work table as a paper weight. The very rough surface keeps it from running. Lots of overspray on the cardboard table cover. Not good for bikes with skinny, round and smooth surfaces. It might work better over solid pink paint. I'm sure I'll be seeing those tiny pink glitters for months to come.


Pink.glitter.spray (2).JPG
Pink.glitter.spray (3).JPG
Pink.glitter.spray (1).JPG
 

Latest posts

Back
Top