yeah you did do a ton of work in a few days . looking good .
B0-X----- WEENIE WAGON -----B0-X
- Thread starter Funkme
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Awesome job getting this caught up. Love what you've got going on with the paint. Looking really good.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
If I spend more than 4 hrs,I get a lot done. The frame is easy to make,so is the tray. Just the fiddle bits,that are a pain. Also I dont document everything,I forget to take pics.My pc takes forever to upload and write messages,have a big problem.So I post once all at the same time...
I have missed a lot of good building going on and joining in on the chatter.But I always like to see what people start with and what they end up with...
I will end up with a half built bike if I dont go out and work on it...
Wow, this is looking great, but seriously I would like " two dogs, mustard, relish..." looking forward to the finish.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Those weenie's are almost ready for rolling.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Less than 22hrs,this is tight and stressfull...
Photos will have to be a backyard shoot. Arrgggg!
Photos will have to be a backyard shoot. Arrgggg!
You cane dooo eett!!!!
Go, Girl, Go!
Luke.
Luke.
Ozzie Ozzie Ozzie. oy oy oy.
With a heap of Funkme get it done, do it right, this one is going to the wire.
But we will be back to see it.
Cause they are always worth the wait.
You have done wonders already to get this far in a country with so much going on around you that has had to limit your resources this year.
With a heap of Funkme get it done, do it right, this one is going to the wire.
But we will be back to see it.
Cause they are always worth the wait.
You have done wonders already to get this far in a country with so much going on around you that has had to limit your resources this year.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Ok Guys it's not 100% done,but it will do.The bike is rideable,actually it cruises nicely,better with the wind behind.
The things I didn't get finish...(I could have but needed to get photos before dark,so pics taken at 7pm) Still have 8 hrs left,but its dark,windy,and I'm knackered.
1- I want to make 2 small doors for the front.
2- Fenders paint them black with gold trim(not sure as it might take away from design)
Have the wood shaped,just need to cut,sand paint.
3- Finish graphics ran out of ink/paint
Paint this one on the back
4- Some gold metal stars on the front sprocket(no paypal,so that will have to wait)
5-Mount in the gas connections
6-Make a weenie roller.
Silly things,but will look the part.
Oh and some springs in the front steering to make it less flip floppy.Noticed that on some of the older bikes they had,now I understand why.In a country with less wind no need.I will find some old bed springs somewhere.
Some things I did.
Mounted the lamps inside the lanterns.
Covered the seat with some fake leather(pleather) from a old bag...
Mounted the horn,It is not in the last photos taken,as it was wet.
What I had for lunch.
The things I didn't get finish...(I could have but needed to get photos before dark,so pics taken at 7pm) Still have 8 hrs left,but its dark,windy,and I'm knackered.
1- I want to make 2 small doors for the front.
2- Fenders paint them black with gold trim(not sure as it might take away from design)
Have the wood shaped,just need to cut,sand paint.
3- Finish graphics ran out of ink/paint
4- Some gold metal stars on the front sprocket(no paypal,so that will have to wait)
5-Mount in the gas connections
6-Make a weenie roller.
Silly things,but will look the part.
Oh and some springs in the front steering to make it less flip floppy.Noticed that on some of the older bikes they had,now I understand why.In a country with less wind no need.I will find some old bed springs somewhere.
Some things I did.
Mounted the lamps inside the lanterns.
Mounted the horn,It is not in the last photos taken,as it was wet.
Last edited:
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
Can't wait for the pics!
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
The Weenie Man made from stainless steel.he Weenie Man will show you around the wagon.
The graphics,painted on,went with the whole vintage circus theme.Made these lantern holders from flat metal,bent a hook to hold stools on.
The brake leaver is made with a old spiral knob.
Last edited by a moderator:
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Having problems uploading.
Driving me crazy...
Now it's time for a nice cold one.
Driving me crazy...
Now it's time for a nice cold one.
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
Wow!
Great job as usual! Not only do you have a cool bike, but now you've got a side business also!
Great job as usual! Not only do you have a cool bike, but now you've got a side business also!
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Hopefully the side business can pay for a knew PC.Wow!
Great job as usual! Not only do you have a cool bike, but now you've got a side business also!
Thanx
This build makes me hungry , you amaze me with your artful creations !
Mark
Mark
