Thank You @OddJob.
Here are the other two from OBC24s trike class.
This green stretch, if I were from scratching this build or had a stretched micargi frame lying around, those would be close to my wanted dimensions.
TRADITIONAL BONINETeen
- Thread starter metalchewy
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Here are the other two from OBC24s trike class.
This green stretch, if I were from scratching this build or had a stretched micargi frame lying around, those would be close to my wanted dimensions.
MattiThundrrr
Rattus All Terrainus
29+ is kinda on the way out in MTB circles, but they're still available. 27.5+ is more practical, because it's an easy swap to a regular 29er, your expensive toy becomes more versatile, almost like 2 bikes! Anyhow, here's a list of some of the offerings, can't guarantee they're still all available or in production though...
https://bikepacking.com/index/29-plus-tires-list/
Vee speedster is probably the one that would be most interesting for the cruiser builds.
Awesome list on that link of 29ers wider than 2.5. Thanks @MattiThundrrr
I was looking at these tires initially. Have you used them before? If so, how do they look/feel?
Looks almost like snake skin. Probably sounds cool on clean pavement.
I've used Vee's 26x3.5 version. Pretty quiet compared to knobbies the same size. A bit bouncy.
A full 2.5 to 3 inches taller in diameter than a 26x2.5 mounted on the same 26x100 hoops.
Here is the axle height difference.
Last edited:
MattiThundrrr
Rattus All Terrainus
Lol I've never ridden a 29er. I just read a lot. I'm the "research and overthink" guy, not the "decide and get it done" guy
Old Eileen fork,
29er bent fork.
Almost Same height. A lot more room. Will still need to adjust the crown and add spacers for the 29" 80mm hoops.
29er bent fork.
Almost Same height. A lot more room. Will still need to adjust the crown and add spacers for the 29" 80mm hoops.
I've ridden multiple, but never owned one.
Dig the new fork! The curves match.
Happy Father's day!!!
As a little preview of things coming up next while I wait for some hubs.
For widening the fork, I dug through my bag of fun and found a widened springer crown that will work well with 5/16 spacers to the side of the fork tube pivot. Just need to take the paint off and put it on the polisher.
I picked this variegated foil up whe I picked up the 29ers from Juan last summer. This will also be an upcoming add. Blue should match well. A surprise or two may happen with it as well.
Gonna head to the hardware store in a bit. After I pressure wash the golf cart frame for paint.
Again, happy Father's Day!!!!
Thanks Lee, I thought so as well. That abrupt bend on the other forks, that I have straightened more than once seemed off on the front, but better than the plain fork.
As a little preview of things coming up next while I wait for some hubs.
For widening the fork, I dug through my bag of fun and found a widened springer crown that will work well with 5/16 spacers to the side of the fork tube pivot. Just need to take the paint off and put it on the polisher.
I picked this variegated foil up whe I picked up the 29ers from Juan last summer. This will also be an upcoming add. Blue should match well. A surprise or two may happen with it as well.
Gonna head to the hardware store in a bit. After I pressure wash the golf cart frame for paint.
Again, happy Father's Day!!!!
Watch out! Gonna be rolling on some Daytons!
Heheh, yup, straight laced and.lots of spokes.
Looking cool in the new fork. Should be pretty mean on the new hoops. 
