I have snapped three chain breaks in the last month or so. of course im using them on alot of ratty chains. is there a good quality chain break out there, should i be taking the old chains off another way??
Chain break that doesnt break?
- Thread starter Jsheetz
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
I am a big fan of the Park Tool for chain tools. They have replaceable pins and are built to last especially the larger shop models. I have been using the CT-5 for 3 or 4 years now and very happy.
On really corroded chains, hit it with some wd-40 or penetrating oil first.
On really corroded chains, hit it with some wd-40 or penetrating oil first.
- Joined
- Aug 3, 2010
- Messages
- 12,545
- Reaction score
- 2,898
I always use the screwdriver and cinder block method, haven't had a problem yet....... :wink:
The Bell chain tool from walmart lasted about 3 chains. forget giving that a try. The park chain tool is twice the price, and a whole lot better investment.
A new Bell chain at walmart is about $8.00, why mess with the old frozen up chain? A cutoff wheel in the angle grinder will make short work of a link of chain, and off it goes.
Just my 2 centavos.
A new Bell chain at walmart is about $8.00, why mess with the old frozen up chain? A cutoff wheel in the angle grinder will make short work of a link of chain, and off it goes.
Just my 2 centavos.
I've done dozens of chains with my Park chain breaker, it's the compact one... small enough to throw in a seat bag, too. Well worth the money.
Park tool chain breakers are pretty much indestructable. For really bad chains I usually cut them off with a pair of bolt cutters or a hacksaw (unless it's a skiptooth). 
i was going to post a link to TSC with the tool but they don't show it on their site, a buddy let me use it for my bike engine chain but i used it on the bike chain with EASE!!
i usually just punch the pin on a block of wood and
i use a C-clamp with washer to pop it back together when i'm done
here is that tool
http://www.redline-ci.com/Race%20Access ... reaker.jpg
i usually just punch the pin on a block of wood and
i use a C-clamp with washer to pop it back together when i'm done
here is that tool
http://www.redline-ci.com/Race%20Access ... reaker.jpg
- Joined
- May 12, 2009
- Messages
- 1,547
- Reaction score
- 118
Alright, now I'm confused. Does the Park Tools chain breaks work on skip tooth chains or not? 90% of what I have is skip tooth. If the Park doesn't work, do any of these other tools work?
I've never tried the Park on a skiptooth, but it doesn't look big enough to hold the links. Hammer, nail/punch, and piece of metal with a hole work with anything. Somebody on another forum had luck with a Park chain tool (CT-7).
http://classicbicycles.comuv.com/phpBB3 ... f=22&t=363
http://classicbicycles.comuv.com/phpBB3 ... f=22&t=363
udallcustombikes said:I picked up a Summit Chain breaker at my LBS today. Has anyone used one? Thoughts about Summit tools?
I use the exact same tool as this, albeit with a different name, and imo its not a bad tool, not the best, but its done 35-40 chains so far, mostly crusty stuff too, but the threads on the T-handle section are getting a lil' floppy now, still works mind!
bicycleguy said:Park tool chain breakers are pretty much indestructable. For really bad chains I usually cut them off with a pair of bolt cutters or a hacksaw (unless it's a skiptooth).
I'm new to the world that is 'skip tooth'
I keep lubing and adjusting mine and hoping all is going to be ok :shock: Here is my lovely chain splitter, not sure of the era but thinking 1950's-1960's its made by Pennant and just feels so cool in your hand if that makes sense?? £3 off english ebay! Works perfect! will look for other's for forum members if you like!!
I have a Park CT-5 chain tool and it's lasting quite well. I have about 15 uses in it so far and the only flaw I had was one of the "walls" bent back a little bit, so all I did was get a hammer and a block of metal to straighten it out and it's like new again.
DO NOT get the Wal-Mart chain tools. They last about 2 trials, 3 if you're lucky. Worthless!
DO NOT get the Wal-Mart chain tools. They last about 2 trials, 3 if you're lucky. Worthless!
schwinnmesa said:I have a Park CT-5 chain tool and it's lasting quite well. I have about 15 uses in it so far and the only flaw I had was one of the "walls" bent back a little bit, so all I did was get a hammer and a block of metal to straighten it out and it's like new again.
DO NOT get the Wal-Mart chain tools. They last about 2 trials, 3 if you're lucky. Worthless!
I had one of the Wally-World chain tools and it lasted through 25 or 30 chains. Of course after the second one the threads were stripped out so I had to use a hammer to drive the pins out.
