SWB0 CobblestoneRat - Done, but still getting little upgrades... ;-)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
So: Go, DHL, Go!!!!
Hopefully they send the fast car
MG2_29361.jpg
 
Another small but important update. Today I took care of brake, shifter and light cables. Like this the only thing that's left for tomorrow is lacing and trueing the wheels...
Brakes are operational, shifter should be when I'm done with the wheels tomorrow.
Lights don't work, I must have messed up something, but as I intend to use battery operated clip on lights most of the time, this has a very low priority and isn't needed for the final pics...
First I took care of the shifter cable. Had to tweak this part a bit, as it normally goes on either one of the main tubes, but I decide to have it on the chain stay. I kept the original size, just drilled an extra hole, you never know...
IMG_20240329_131530340.jpg

Ready to be hooked up
IMG_20240329_154642090.jpg


Cockpit looks nice and tidy
IMG_20240329_154623845_HDR.jpg

Rear brakes are all done
IMG_20240329_154539641.jpg

And front as well
IMG_20240329_160146731_HDR.jpg
 
That was a busy fast paced afternoon... 🥵
After I finally got my spokes delivered I headed out to the campground to set up my workshop there.
IMG_20240330_141401566.jpg

First I went a lacing the spokes.
IMG_20240330_141528479.jpg

It took me about half an hour to get both wheels done (made one mistake that got me puzzled later when truing)
IMG_20240330_144640836.jpg

Another one and a half hour later both wheels were done. Not perfect, but good enough for me for now.
Front

And back

With the wheels done I could finally put all together and go for a quick ride.
Let's put it like this: It's a new experience of a ride for me and it will get time to get used to it but it rides fine. Shifting, saddle and handlebar needs some fine-tuning but so far so good.
Last item for today was the chainguard. This took some ratrodding but with the good old holy band I got it done.
IMG_20240330_180201129.jpg

Done
IMG_20240330_180850415.jpg

Then it was time to load the bike back on the car and meet up with rest of the family to enjoy a local Easter bonfire
IMG_20240330_193202552.jpg
IMG_20240330_192548241.jpg

Tomorrow I'll try to get some decent pictures to post up in the finished section...
 
Last edited:
On my way back home I just had to stop here and take a picture. It was occupied on the way out, so I somehow missed this almost perfectly ratty spot for the CobblestoneRat...
IMG_20240331_191318664_2.jpg

IMG_20240331_191336712_2.jpg
 
After all the rush to get this one into the finished section, it's time now to do some refinements.
Today I upgraded the flagpole. The first one was just an extendable broomstick I got very cheap (less than 3.-€) it was good to proof the concept was doable, but when I tried to ride with the large swiss flag I realized that the turbulences behind my body didn't let it "fly". It just needed to get higher up.
So I hit my favorite outdoor store today and bought a slim and long extendable tarp (or tent) pole for around 25.- € and some more hardware that fitted the different smaller diameter.
Here's a short clip were I'm riding with the flag

Here's the new pole fully extended:
IMG_20240402_155326627.jpg

and the attachment points:
IMG_20240402_155346372.jpg

IMG_20240402_155352618.jpg

And here's the pole pushed back together and tilted forward to ride without flag.
IMG_20240402_155533772.jpg

This system could easily be adapted to other bikes (I'll maybe try it on my Wolverine in the future)
 
And I got a bit creative this evening.
First I made these:
IMG_20240402_210428481.jpg

And as the material was already out, I cut it up some more...
IMG_20240402_211125602.jpg

...and ended up with this:
IMG_20240402_213644351.jpg

It will all go on the bike tomorrow.
 
That blank spot next to the participants sticker was filled today.
IMG_20240413_183716925.jpg

I think the rear fender locks good now
IMG_20240413_183713678.jpg

But this sticker I got today is just perfect!
IMG_20240413_183657659_HDR.jpg

I spent today at the yearly VELO bicycle fair at the Tempelhof airfield. That's were I got these stickers (and many more). I'll post a larger, picture heavy post about this weekend tomorrow after my second day on the fair in the "What have you been riding lately" thread.
Here some pictures I took on the airfield
IMG_20240413_184033203.jpg

IMG_20240413_184429374.jpg

GIF_20240413_225603_275.gif

And here's a new walk-around video
 
Hey Swissguy, sorry for hijacking your thread. You took your last pictures at a very special place and i want to show some photos to our friends: the Tempelhofer Feld, the large disused airport in the middle of Berlin, where the airplanes of the allies landed and took off during the Berlin Airlift. And also dropped chocolate on small parachutes for the Berlin children. This was the idea of US pilot Gail Halvorsen, who has made a place for himself in the hearts of all Berliners...
Today a huge open field for sports and culture and for coming together. I really adore this place. Anyone who ever visits Berlin has to see this field for themselves.


EWS-TEMPELHOFER-FELD.jpg

tempelhofer_feld_berlin_131632548.jpg

tempelhofer-feld_visitBerlin,Foto-Dagmar-Schwelle.jpg

Tempelhofer-Feld-drachen_dpa.jpg

Tempelhofer-Feld-schnee_dpa.jpg

thf2_wessner.jpg

imago0103071218h.jpg



The "Candy Bombers":

csm_ullstein_high_00148295_Luftbruecke_12275a4cc9.jpg

214671893_1529842415_v16_9_1200~2.jpg

f2fe6079-0001-0004-0000-000000597151_w488_r1.778_fpx40.82_fpy49.97.jpg







RIP Gail Halvorsen 1920 - 2022

Screenshot_20240414-181631~2.png
 
The last few weeks I used the CobblestoneRat quite a lot: Protest rides and my regular commute, but also for a few days of exraordinary commuting to the center of Berlin (15 km one way) for works council seminars. Today on the last 100 meters before reaching my home, there was all of a sudden a loud rattling noise....
IMG_20240507_164808708.jpg

The fender tab I had created to make the rear sweeper fender had snapped off...
IMG_20240507_164818378.jpg

The uneven (cobblestone) roads and bumpy bike paths of Berlin had taken their toll...
Thankfully a long weekend is ahead to take care of the necessary repair and as a member of the n+1 bicycle club I have a few spare bikes ready...
 
Today I took my time to repair the fender.
First I searched through my IKEA leftovers and found this part and cut it apart.
IMG_20240511_160917929.jpg

A little bending
IMG_20240511_161059906.jpg

And some drilling and filing later, the fender joint was better than before...
IMG_20240511_164531489.jpg
 

Latest posts

Back
Top