Fixing up a Schwinn

[Bikenutscott]

I got a Schwinn really cheap since it was painted all gold for a parade. I am trying to take a little time restoring it. I would like to identify it as well. I managed to not get too impatient and see if there was anything hiding under the gold paint on the chain guard. I managed to get the following pictures. The frame ID number is HA103915. One identifier said it is a 1965, but the rims are steel and made in Taiwan with heavy duty spokes.

Closest chain guard I could find is a cruiser/spitfire, but I couldn't find any with this color or paint style. Ideas? Thanks BikenutScott

 

[Wildcat]

That's a frame made in Oct 1965.
That's a later model lettering and may have been added along with the wheels. Some pics of the whole bike is needed.

 

[rickpaulos]

I've seen many Schwinn middleweights with non-oem wheels. The 26 x 3/4 S6 tires weren't always available or the price was too high for the owner so they would swap for S2 wheels in the now industry standard 26 x 1.nn or 2.nn. The tire size is usually molded into the tire sidewall or printed on. Newer tires would have the ISO size: 559 for S2, 597 for S6.

Schwinn used "heavy duty" spokes and rims on the Heavy Duti, the Twinn tandems and the older Town & Country tandems. "Heavy duty" is a relative term. They are typically thicker than 14g (.080") in several sizes up to 0.120". You could measure the spoke diameter. Schwinn used Bendix coaster brake 1 speed hubs in the 1960s.

 

[musclebikemadman]

I got a Schwinn really cheap since it was painted all gold for a parade. I am trying to take a little time restoring it. I would like to identify it as well. I managed to not get too impatient and see if there was anything hiding under the gold paint on the chain guard. I managed to get the following pictures. The frame ID number is HA103915. One identifier said it is a 1965, but the rims are steel and made in Taiwan with heavy duty spokes.

Closest chain guard I could find is a cruiser/spitfire, but I couldn't find any with this color or paint style. Ideas? Thanks BikenutScott

That guard is off a Cruiser made after the Chicago plant closed down in 1982. It is not a 1965 guard thought it may fit.

 

[DesmoDog]

Between the guard and the wheels I'd be skeptical that the frame is an old school Chicago Schwinn frame.

I seem to recall that later "Schwinns" had serial numbers that confused the Schwinn date decoder schemes. What does the fork look like and where is the serial number?

For reference, here is a picture of an '89 Schwinn Cruiser. I'm going to bet your fork looks the same? Also, the tag on the front used to have four digits stamped in it, you can find the year from that.

 

[musclebikemadman]

I got a Schwinn really cheap since it was painted all gold for a parade. I am trying to take a little time restoring it. I would like to identify it as well. I managed to not get too impatient and see if there was anything hiding under the gold paint on the chain guard. I managed to get the following pictures. The frame ID number is HA103915. One identifier said it is a 1965, but the rims are steel and made in Taiwan with heavy duty spokes.

Closest chain guard I could find is a cruiser/spitfire, but I couldn't find any with this color or paint style. Ideas? Thanks BikenutScott

A 1965 serial number would have 2 letters and 5 numbers, yours has 6 numbers for sure not a 1965. Where is the serial number stamped '65 would be rear drop out

 

[Wildcat]

You're right, only 5 numbers, I'll update my serial number notes. I stand corrected, it's not a 65. So it most probably is a post-Chicago made cruiser, like the one DesmoDog is showing. A good bike for a build even if it wasn't made in Chicago.
I'd like to do some digging to see where it may have been made and what year, so A few pics of the bike and number will help.

 

[Bikenutscott]

You guys are amazing. True bicycle encyclopedias. That makes the most sense about the wheels, the rear hub is a Hi Stop #305 one speed. The spokes measure .100 so are likely 12g. The rims are. So what pictures would help? The bike is totally disassembled including the wheels. In the end it seems like the wheels were added later. What do you guys think the chain guard suggests?

Thanks for all the great info. All you shared adds up to what I have for a bike. Desmo Dog, the picture brings it all together. The stem has the four bolts, like BMX. The fork is tubular. Here is a picture of the head badge below. All of you are the greatest, thanks for sharing your knowledge. Scott

 

[twojs.bike]

Head badge has screws. From my experience the non-chicago head badges are riveted. Not sure that is 100% true 100% of the time.

I don’t think we have seen a picture of the whole bike frame yet?

 

[DesmoDog]

Head badge has screws. From my experience the non-chicago head badges are riveted. Not sure that is 100% true 100% of the time.

I don’t think we have seen a picture of the whole bike frame yet?

The fact that it says "Schwinn Quality" vs simply "Schwinn" makes me think it's not a Chicago made bike. No idea on how the badges were attached.

Everything so far says this is an early '90s "Schwinn"

Check this out:
https://ratrodbikes.com/threads/1992-schwinn-cruiser-on-the-block.11056/

 

[twojs.bike]

Good point!