Keep on trucking

[burrolalb]

So this is my 84 murry so far

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[OneHorsePower]

already stipped and ready to have fun
any plans in mind ?

 

[LukeTheJoker]

Nice base to start with!

 

[burrolalb]

Primer day lol

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[burrolalb]

So here is my idea with this one lol im thinking to put a 24 inch rim in front and a 26 inch in back but i just go with the flow what comes to mind lol

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[Funkme]

Great frame to start with,stripped and naked...

 

[burrolalb]

Got the paint ... going with flake .... color of the flake is freekin fuscha and the top color is sublime green and its a candy color ... the brand of the can is lil daddy's roth rattle bomb .... wish me luck first time using this stuff

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[gowjobs]

I've used it a couple of times now. It seems to like lighter coats with about an hour drying time between them.

 

[Muttley]

Got the paint...going with flake....color of the flake is Freakin' Fuchsia and the top color is Sublime Green and it's a candy color...the brand of the can is Lil' Daddy Roth Rattle Bomb..wish me luck first time using this stuff.

Candy green over fuchsia? I'll need to see LOTS of photos.

 

[burrolalb]

I've used it a couple of times now. It seems to like lighter coats with about an hour drying time between them.

Ya im going to try that but i think i need 1 more can for the flake how many do you use

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[gowjobs]

I did a gold/bronze base fade job, one full can of All-in-one Daffodil Killer gold, two coats (half can) of Finkster Green pearl and two full cans of 2K clear (3 heavy coats).

 

[burrolalb]

I did a gold/bronze base fade job, one full can of All-in-one Daffodil Killer gold, two coats (half can) of Finkster Green pearl and two full cans of 2K clear (3 heavy coats).

Thats a real good job .... ya i was going to get a all in one can but the dude at mooneys said its better to do steps .... but now i see your job i didnt need to do it in steps

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[gowjobs]

Thats a real good job .... ya i was going to get a all in one can but the dude at mooneys said its better to do steps .... but now i see your job i didnt need to do it in steps

Sent from my SAMSUNG-SM-G920A using Tapatalk

I think it all depends on the result that you were looking for.

 

[LukeTheJoker]

Got the paint ... going with flake .... color of the flake is freekin fuscha and the top color is sublime green and its a candy color ... the brand of the can is lil daddy's roth rattle bomb .... wish me luck first time using this stuff

Sent from my SAMSUNG-SM-G920A using Tapatalk

Looking forward to seeing how this comes out!
Also interested to know how much it will cost all up once it is done, I know buying the set up for compressor spraying and a dry flake gun can be expensive, but once you have it, painting with flake is actually surprisingly cheap.

 

[Indyjps]

I wanna see how the Roth cans co e out, ive seen guys use it to flake car roofs.

If you wanna try shooting with a gun, Intercoat clear carries the flake nice, need a big tip for bass boat flake.

So if you wanna experiment, a harbor freight gun with a drilled out tip, and over thinned clear will get the flake on. Stay way back and just blow the flake on fast and thin coats - the clear is thinned way out so don't get a run, just mist it on as a flake carrier. Let it tack off each coat, then start burying it in regular clear.

Here's a budget clear, I've shot this companies paint before on budget car repaints. https://www.paintforcars.com/mm5/me...&Product_Code=clearcoat_aecc&Store_Code=PFC#0

 

[burrolalb]

I wanna see how the Roth cans co e out, ive seen guys use it to flake car roofs.

If you wanna try shooting with a gun, Intercoat clear carries the flake nice, need a big tip for bass boat flake.

So if you wanna experiment, a harbor freight gun with a drilled out tip, and over thinned clear will get the flake on. Stay way back and just blow the flake on fast and thin coats - the clear is thinned way out so don't get a run, just mist it on as a flake carrier. Let it tack off each coat, then start burying it in regular clear.

Here's a budget clear, I've shot this companies paint before on budget car repaints. https://www.paintforcars.com/mm5/me...&Product_Code=clearcoat_aecc&Store_Code=PFC#0

Thank you very much for the link and tips .... ya the can worked but i really didn't like how the can came out , i thought it wasted more paint than it put on ,so ya im going to try it with a gun , i like the challenge of it im having fun ... ill send some pics what it looked with the can ...thanks again

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[burrolalb]

Here are some pictures from the can .... the pictures are miss leading ...

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[burrolalb]

This is what im thinking those are extra parts that i have .... so a springer fork, 26 in the back 24 in the front ....

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[LukeTheJoker]

Looks good!

 

[burrolalb]

Sorry im out out of funds for this build .... good luck to everyone

Sent from my SAMSUNG-SM-G920A using Tapatalk