Klunker build. (Fabricating a slingshot stem)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 18, 2019
Messages
1,637
Reaction score
5,938
Location
Twente, the Netherlands
Rating - 0%
0   0   0
Hey y'all builders, I found a cheap cruiser bike near me. I saw the pictures on a online marketplace and the bike was absolutely hideous... But with potential! Tires and parts seemed like new, but pictures were bad.
The owner got an offer from someone else of 15 bucks but was not letting it go that easy. I did my offer and he said thats alright, come by Saturday afternoon.
And I did! He took it out of the garage and the bike was new. He said he won it at an football game and never cycled it, because he thought riding singlespeed was hard.
I replied and I said: I'm peddling these bad boys up in the hills in Nijverdal and its called Klunking!
Silence commenced... hmm... I gave him the money, thanked him kindly and took this thing home.

And here she is in all her glory 🤮🤣

I first removed the tank plate.



1000035477.jpg

1000035478.jpg

1000035479.jpg




But never give up hope, if you see the details and through the stickers:
1000035480.jpg

1000035482.jpg

Cool retro tires! Grey rims.

1000035490.jpg

1000035488.jpg

Histop coasterbrake hub... not the worst, but I'd rather have the Shimano.




They I started lightweightin' removing them patches and fenders:

1000035507.jpg

1000035514.jpg

1000035516.jpg

Added a brooks saddle.


And it started looking pretty cool. I even like the orange colour at the moment.

1000035513.jpg

1000035515.jpg

1000035517.jpg

1000035508.jpg

1000035510.jpg

1000035512.jpg




I plan to do quite some things:
Add a tougher, set back seatpost.
Lubricate the hub, chain and bottom bracket.
Finished the paint, where the stickers are off at the frontal black section.
Check the tubes and tires.
Different bars.
Remove the 'Holland Cruiser' sticker on the downtube without damaging the paint.

So what do you think? Pretty neat so far right!
 
Yep it looks good! A good set of bars might need a new stem also.

I would paint it all black, put the tank panel back in with this decal on both sides:
View attachment 282145
But that's just me.
Wow, cool decal! Where did it came from?
I cycle hard! But I'm not really a destroyer, my sticker would say: Build, Klunk, Mechanical Sympathy :grin:
Thanks for your input, very cool!

Yeah, that was a great score! I agree on better bars but for the money that's a pretty trick klunk!
Better bars definitely! Thanks Pondo!

A few pictures during the day:

1000035564.jpg

1000035566.jpg

1000035579.jpg

The plate screws were stuck, so had to drill them out.


I'm slowly removing the downtube sticker that says: Holland Cruiser.

Looking for BMX / Motocross bars, maybe add a few blue anodized parts. We will see where this build takes me. In the end most certainly on local singletracks!
 
I was wondering; With this orange colour I intend to keep, are anodized parts like a stem, a seatpost or a chainring a nice addition?
I have the option to buy some NOS red or blue anodized parts. I'm thinking blue would fit the orange paint:
1000035606.jpg

1000035513.jpg
 
Blauw

View attachment 282308

Bonus: inspirational picture of a distant cousin, looking at a canalView attachment 282309
Very nice! Duck Norris is welcome to visit :thumbsup:

Blue goes good with orange
Alligator Swimming GIF by University of Florida
Very nice! I'm still considering it.


Bars came in! I searched for some second hand bars, but couldnt find any in my area.
So I have found a moped shop that sells bars for a pretty neat price!

1000035669.jpg

The bottom one is one I used before, it is 86 centimetres wide stock!

20230212_111910.jpg

These.




But I am probably going to use this beaut:
1000035672.jpg

1000035673.jpg

Look at those angles!

1000035674.jpg

1000035675.jpg

1000035676.jpg

Shall I fabricate my own stem?



1000035678.jpg

22.2mm



And I managed to remove all stickers from the frame:

1000035640.jpg

1000035643.jpg

Sweet GIF
 
Last edited:
Slingshot stem might be an ideal match
View attachment 282387
Yes indeed!

I can't find a second hand one so I'll try and braze one.

Ingredients:
1000035702.jpg

1000035698.jpg

1000035704.jpg

I took optimus his mask off!

1000035767.jpg

Pretty cool idea right?

Now I gotta scramble ideas and parts.
In what position am I brazing this? 90 degree angle? (Forward) or with a little upslope like the picture?

I like to try this idea, I'm all excited!
 
Yes indeed!

I can't find a second hand one so I'll try and braze one.

Ingredients:
View attachment 282489
View attachment 282490
View attachment 282491
I took optimus his mask off!



View attachment 282492
Pretty cool idea right?

Now I gotta scramble ideas and parts.
In what position am I brazing this? 90 degree angle? (Forward) or with a little upslope like the picture?

I like to try this idea, I'm all excited!

This is cool! Can’t wait to see what you come up with. 👍
 
This is cool! Can’t wait to see what you come up with. 👍

1000035767.jpg

1000035837.jpg

1000035862.jpg

1000035865.jpg

1000035869.jpg

1000035870.jpg

The cover is not made of steel, zinc maybe?

I'll have to place it before brazing and don't know if it will stand the heat.
 
Could it be wrapped in a wet cloth to keep it cool?
Good idea. Maybe, or I'll just leave it off.
Or, cut it and fit afterwards.

I'll think about it.


In the meantime:
1000035828.jpg

1000035829.jpg

1000035830.jpg

Tomorrow I'll put this stem shaft in the lathe and turn it from 22,2 to 21mm, so it fits inside the seatpost.
This type of seatpost bend near the seatclamp and I wanted it stronger there.

I could build a CrMo version like before, but I wanted the chrome plating and that is ridiculously expensive here. So this is, a neat little tryout!
 
Hi guys!

I found a great used Brooks C17 'carved' seat for this machine!

And managed to prepare and braze the first connection of the stem. I will file/sand the brazed connection afterwards.
I am still practicing the brazing/soldering, so feel free to comment on that.


1000036004.jpg

1000036001.jpg

1000036023.jpg

1000036026.jpg

1000036027.jpg

1000036019.jpg

1000036020.jpg

1000036021.jpg

1000036022.jpg

1000036005.jpg

I might use these for the bars. I'll have to check if the rod from the bar fits through the gap (of this clamp) and if it fits when brazed.
 

Attachments

  • 1000036025.jpg
    1000036025.jpg
    260.8 KB
  • 1000036024.jpg
    1000036024.jpg
    281.3 KB

Latest posts

Back
Top