Low Flyer...."Building a Better X53"
- Thread starter Jaypem
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
- Joined
- May 6, 2016
- Messages
- 517
- Reaction score
- 1,442
Checking out the new lines I'll have to work with.
I'll try and re-bend the entire rear bar/rack tubes I think...It's going to be challenging!
Looks like the best look might be an S bend piece of tube that connects the tank bars to the rack tubes....Or maybe something else entirely?
I've got some ideas cooking
I'll try and re-bend the entire rear bar/rack tubes I think...It's going to be challenging!
Looks like the best look might be an S bend piece of tube that connects the tank bars to the rack tubes....Or maybe something else entirely?
I've got some ideas cooking
@GuitarlCarl picked one up recently for a build, perhaps he could help you out with a reference..Yep, but now I need to find a skip tooth cog.
I'll figure out the size later and
Try and get one somewhere
I think I smell what your cooking.
Skiptooth cog for a modern Bendix?
I got mine from eBay.
Guitarl. [emoji450]
Skiptooth cog for a modern Bendix?
I got mine from eBay.
Guitarl. [emoji450]
Lookin awesome. Man, you got skills.
Fv2
Don't know what I'm doing, gonna do it anyway.
Maybe with the frame drooped down a bit, you might consider doing something similar to the rack tubing? Just spitballing here:
- Joined
- May 6, 2016
- Messages
- 517
- Reaction score
- 1,442
Yep, I'm thinking I'll have to restyle the rack from the original....the tank tubes need to extend al the way back to the rear.Maybe with the frame drooped down a bit, you might consider doing something similar to the rack tubing? Just spitballing here:
The rack of course has to be above the fender, looks like there will end up being 3 parallel lines, with the bars that hold the rack rolling down to meet the new bar that continues from the tank. Also hoping to scooch the rack itself back enough to slam the seat a bit more, gotta work that out....whew, that's a lot of talk...
Hopefully one or the other of my buddies has a tubing bender that will be able to make that nice tight bend in the back.
I really like where this one is headed.
Great ideas flowing together well so far.
Great ideas flowing together well so far.
OH YEAH!!!! That is slick!
- Joined
- May 6, 2016
- Messages
- 517
- Reaction score
- 1,442
This tank will end up being welded on permanently.
Lots of weird bends and warps welding these babies together, plus the frame style is trickier to fit than a simple straight bar would be.
My sheetmetal skills are not up to the task of form fitting, I'm lucky when I can get these shapes pretty close.
Haven't decided on a paint scheme yet..It'll be an important part of this bikes look. I do want to distress the paint alot.
I do have an idea, can't wait to try it out!
Prob is that I'll have to get my paint on, then weld the tank on.
I guess there will be touch up painting to do around the welded spots...But should be no biggie since it's going to be a ratty paint job anyway
Lots of weird bends and warps welding these babies together, plus the frame style is trickier to fit than a simple straight bar would be.
My sheetmetal skills are not up to the task of form fitting, I'm lucky when I can get these shapes pretty close.
Haven't decided on a paint scheme yet..It'll be an important part of this bikes look. I do want to distress the paint alot.
I do have an idea, can't wait to try it out!
Prob is that I'll have to get my paint on, then weld the tank on.
I guess there will be touch up painting to do around the welded spots...But should be no biggie since it's going to be a ratty paint job anyway
