Lube makes a difference with the cutting/drilling. Can't wait to see the roller!
(MBBO#05 Class 2) J.C. Draggins..... Finished
- Thread starter Fv2
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Forks are coming out awesome!!!!
Have you considered using paella pans instead of pizza pans like @MONARKofSoCal did in BO11?
They already have dish built into them.
Have you considered using paella pans instead of pizza pans like @MONARKofSoCal did in BO11?
They already have dish built into them.
Verry Nice ! well done drilling thoseUpper tree mounted, what do y'all think?
Break time over, time to GTB.
Sent from my LGL34C using Tapatalk
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
Looks great!Upper tree mounted, what do y'all think?
Break time over, time to GTB.
Sent from my LGL34C using Tapatalk
...also intimidating and dangerous!
That tree is forkin' cool! A vintage vibe with a modern 'edge'.... 
I love the forks so far. I have a friend who was drafted by the white Sox but is also a life long cubs fan.
Fv2
Don't know what I'm doing, gonna do it anyway.
Hey @CRASH what was that you said about
Drag fork?
I miscalculated the holes a bit, but got them well enough that I can fix them.
I can weld, but I'm no welder. I'll clean them up and go over them again. But overall, I'm pretty stoked.
And remember, I'm not using these bars; I'll make those too.
Sent from my LGL34C using Tapatalk
Drag fork?
I miscalculated the holes a bit, but got them well enough that I can fix them.
I can weld, but I'm no welder. I'll clean them up and go over them again. But overall, I'm pretty stoked.
And remember, I'm not using these bars; I'll make those too.
Sent from my LGL34C using Tapatalk
Fv2
Don't know what I'm doing, gonna do it anyway.
Thanks, I did consider that. Only thing about the paella pans is they aren't smooth, atleast not the ones I saw.
Yea, they're very sharp and pointy. I'll file them a bit.Looks great!
...also intimidating and dangerous!
I wonder how the guy on the Indians feels now, can't remember his name but he's a lifelong cubs fan too.
Thank you all for the comments, I really appreciate them...good or bad. Let me know what you think of the stance.
A.S.BOLTNUT
He who dies with the most toys ,still dies No Fear
The stance is Killer I like it , very good looking bike already , Bad to the Bone ...
Agree with Mr Boltnut above ^ ! Yes, it is 'bad', and that's good. I can't help but thinking the rust and crust really adds to the rat-isfaction I'm feeling just seeing it put together for the first time. Any chance it will stay that way?
Annnnd...I want to see video of you with that long front end up in the air and you railing on the wheelie bars! WAHOOOOOO!
Annnnd...I want to see video of you with that long front end up in the air and you railing on the wheelie bars! WAHOOOOOO!
Fv2
Don't know what I'm doing, gonna do it anyway.
Thanks.
Nope, it'll be painted. Unfortunately I won't be able to chrome the fork, but I plan to see how shiny I can get bare metal.Agree with Mr Boltnut above ^ ! Yes, it is 'bad', and that's good. I can't help but thinking the rust and crust really adds to the rat-isfaction I'm feeling just seeing it put together for the first time. Any chance it will stay that way?
Annnnd...I want to see video of you with that long front end up in the air and you railing on the wheelie bars! WAHOOOOOO!
As I said, I'm no welder. But, yea...there will be a video.
Assuming the front end isn't to heavy to hold up.
Sits AWESOME! Nice work so far[emoji1303]Hey @CRASH what was that you said about
Drag fork?
I miscalculated the holes a bit, but got them well enough that I can fix them.
I can weld, but I'm no welder. I'll clean them up and go over them again. But overall, I'm pretty stoked.
And remember, I'm not using these bars; I'll make those too.
Sent from my LGL34C using Tapatalk
Sent from my iPhone using Tapatalk
Fv2
Don't know what I'm doing, gonna do it anyway.
So the maiden voyage was a lot of hold on tight and trying to pedal to no avail.
After realizing the rake was far to much, I re-adjusted the fork length.
Still a little wobbly, and a pedal scraper... but rideable.
Then I noticed this.
The lower tree bent pretty well.
That's 11g steel... re-enforcement needed?
Will need to find a shorter crank too.
This definitely won't be a long trip bike.
Sent from my LGL34C using Tapatalk
After realizing the rake was far to much, I re-adjusted the fork length.
Still a little wobbly, and a pedal scraper... but rideable.
Then I noticed this.
The lower tree bent pretty well.
That's 11g steel... re-enforcement needed?
Will need to find a shorter crank too.
This definitely won't be a long trip bike.
Sent from my LGL34C using Tapatalk
Ruh rho....
Man that's a bummer. Are the forks welded into both sets of trees? Maybe you could straighten it and add a perpendicular brace underneath? Kind of make it like a "t"
It's looking pretty wicked.
It's looking pretty wicked.
Fv2
Don't know what I'm doing, gonna do it anyway.
No, if I welded the top tree I couldn't take it apart for paint and new bearings and such.
I'll straighten it out and make some kind of re-enforcement.
I had to quit today, caught a piece of metal just under my glasses. Have some face swelling. I'll figure something out this weekend.
Turns out we have a couple more nice days.
Some little pieces of steel welded to the fork legs so that the top plate sit directly on top of them and prevent the fork legs sliding through, will make the top plate structural and help stop the lower plate bending...
Luke.
Stance is killer by the way!
Luke.
Luke.
Fv2
Don't know what I'm doing, gonna do it anyway.
Stance is killer by the way!
Luke.
Thanks.
I thought about using seat post clamps or something around the fork legs under the top tree, I'll have to poke around the scrap pile for something.
I like how it sits too, seems a few folks here do. I just wish it was rideable the way it sits in the roller pic.
The forks will be shorter, with the wheel closer to the frame so I can ride it.
Makes me wonder how the bike CRASH posted handles.
If your turning down a dragstrip you're doing it wrong... Spring steering dampener and bars pushed out should get you down the 1/8 just fine.
Looks awsome.
Looks awsome.
