You joining the fun this year
Pure class swear this thing doesn't want me to finish
- Thread starter ingola
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Lucky 7 seat post is 5/8 but the monark seat tube on the monarch is 13/16 or 20.6375 mm
This old stem fits
And is 5/8 Id
Weld that together tomorrow
This old stem fits
And is 5/8 Id
Weld that together tomorrow
MattiThundrrr
Rattus All Terrainus
Awww, that's not the alloy SR stem, is it?
It fit and was strippedAwww, that's not the alloy SR stem, is it?
Ok somethings you just can't clean
Chrome to far gone knew it all ready
Doing one peice at a time you also need to know when it's to much
Chrome to far gone knew it all ready
Doing one peice at a time you also need to know when it's to much
MattiThundrrr
Rattus All Terrainus
I've seen it, touched it... The silver is strong, and the burgundy is deep. The contrast is popping
- Joined
- Sep 10, 2014
- Messages
- 321
- Reaction score
- 1,393
Colors are poppin. Rattle on.
- Joined
- Aug 17, 2019
- Messages
- 1,931
- Reaction score
- 5,380
Looks awesome.
Thanks
Forks are on
Need to pick bolts for the bottom
Need to pick bolts for the bottom
Woods in from the planers
Not much done today but got the front finished
Front fender just sitting on the tire back pretty much to need to do something about that rear brace
Front fender just sitting on the tire back pretty much to need to do something about that rear brace
- Joined
- Aug 17, 2019
- Messages
- 1,931
- Reaction score
- 5,380
Fenders look epic….. front fenders look like you could flip it….. have the longer portion to the back….
Way it's going but just sitting so had to leave it forward
That color combo is super classy!
Love that burgundy spring, good thinking.
Gunmetal paint for-the-win! And that burgundy is a perfect complimentary color. The creme tires really add that 'era perfect' look.
To me, the chrome fenders are too bright, with all the other subtle beauty on this, beauty. But you have the perfect color palette to 'smoke' the chrome! I used the Duplicolor Metalcast Smoke chrome on my RaTsberry BuffeT spyder build a few years ago. It would look awesome on your build, as it fits in well with your aged fork parts, and color scheme.
Get the Duplicolor Adhesion Promoter to put on right over the factory chrome, no sanding because that will scratch the chrome. That will greatly help the Metalcast to adhere to the slippery new chrome.
And the RaTsberry...
I did all the chrome parts, and even the plastic shifter housing on this build. Here's a close up of the fender and brake caliper with the Metalcast Smoke. Tell your wife it has that 'rich, deep color' she recommended.
To me, the chrome fenders are too bright, with all the other subtle beauty on this, beauty. But you have the perfect color palette to 'smoke' the chrome! I used the Duplicolor Metalcast Smoke chrome on my RaTsberry BuffeT spyder build a few years ago. It would look awesome on your build, as it fits in well with your aged fork parts, and color scheme.
Get the Duplicolor Adhesion Promoter to put on right over the factory chrome, no sanding because that will scratch the chrome. That will greatly help the Metalcast to adhere to the slippery new chrome.
And the RaTsberry...
I did all the chrome parts, and even the plastic shifter housing on this build. Here's a close up of the fender and brake caliper with the Metalcast Smoke. Tell your wife it has that 'rich, deep color' she recommended.
You were reading my mind she said they had to go to
