RASPBERRY CHEESECAKE-Worksman Wheels/Drum Brake

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 9, 2012
Messages
190
Reaction score
26
Location
San Jose, CA
Rating - 100%
7   0   0
77720fa3a17265d16f4d6fda3b46e578_zpsb7a6f2b0.jpg


6dbc4e746f41aec8c6f697df8f9363a6_zps85d1fa0f.jpg



Picked up this Colson Evans frame from ASBoltnut.
Colson5.jpg

I wasn't sure what I was going to build, I knew I wanted some sort of gearing to make this a rider. Single speeds can be a little limiting. Then I found this Girvin fork and looks like I will be building a Klunker/Bomber/Cal/BMX Cruiser (not sure what to call it yet).
photo14.jpg

I stripped the frame and filled in the holes for the rack and fenders.
SanJose-20121028-00703.jpg

SanJose-20121028-00704.jpg

A little body work and cleaned up the spot welds at the dropouts.
SanJose-20121028-00712.jpg

SanJose-20121028-00713.jpg

Had these drop centers and picked up a shimano 3-speed
SanJose-20121028-00717.jpg

A quick polish on the Girvins and it looks like they will be real nice.
image10.jpg

Some parts painted
photo17.jpg

Trying out a color combination, I am not too sure if I will go with this.
photo21.jpg

Also have these kneesaver 2 bars, and redline pedals. Will have to mock up and see how they look. I may have to find some better bars.
SanJose-20121023-00688.jpg
 
Re: 2nd Build (no name yet)

bike2112 said:
Love the colors and parts. Great looking start. Are you going to integrate the Girvin legs with the fork you painted????

I am just painting the original fork to match. I dont plan on using it but want to have it match in case I want to switch it up later.
 
Re: 2nd Build (no name yet)

Beautiful color combo. 8)
 
Re: 2nd Build (no name yet)

I put the second color on the frame this weekend.
photo22.jpg

photo24.jpg


I still havent thought of a name yet. Looking for suggestions???
 
Re: 2nd Build (no name yet)

Looks awesome! Love the color combo. What kind of paint are you using?
 
RASPBERRY CHEESECAKE Mock-up

I laced the front wheel and I am waiting on a three speed I ordered from the Electra sale for the rear

066EFD57-CDFA-477E-B568-71E177D06C8F-19044-000024AE8D828753.jpg


I installed the Girvin and bars.

C1098F55-39B8-4E99-A114-27883EE7A99B-19044-000024AE83B12152.jpg


I'm not sure if the kneesaver bars are right for this. Will have to see when it's all together.

D90B6DBE-6467-494F-AC56-D049F4D8FF14-18999-000024A71B211A1A.jpg
 
Re: RASPBERRY CHEESECAKE mock-up

Vipon said:
how did you get that handle bar on the Girven?

The stem on this Girvin is steel. I was able to carefully open the jaws (I used a drift in the front hole) far enough to install the bars from the bottom.
 
Re: RASPBERRY CHEESECAKE mock-up

This is a beauty!!!
 

Latest posts

Back
Top