SaltHammer Savannah Sand Flats Silver King (1935 Monark Silver King) - Aug01 FINISHED! What A Blast!

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Made some progress yesterday getting the scaly layer from the frame. Not sure is this is some sort of scaly corrosion or old clear coat. Basically have to go inch by inch and scrape it away. Now I am down to the Duralium and I can start polishing.

20160709_144144.jpg
20160709_144151.jpg
20160709_144156.jpg
20160709_144204.jpg
20160709_144213.jpg
20160709_144221.jpg
20160709_145614.jpg
20160709_145620.jpg
20160709_151252.jpg
20160709_161008.jpg
20160709_161015.jpg
20160709_170158.jpg
20160709_170207.jpg
20160709_170214.jpg
20160709_172658.jpg
20160709_173040.jpg
20160709_173058.jpg
20160709_175625.jpg
20160709_181624.jpg



The headbadge came out really nice.

20160709_190303.jpg



I also got all of the coats of Forged Hammered Antique Pewter on the fenders.

20160709_193148.jpg



These came in the mail too.

20160709_193555.jpg
 
Here is a little One Year Flashback to see where I was last year at this point in the game.

vjul10.jpg
 
First pass, start with 1000 grit wetsand and rubbing compound. Followed by red buff wheel on a drill, followed by MAAS polishing creme. Not bad for 15 minutes of work. I'll do a deeper Polish later.


20160710_122620.jpg
20160710_122627.jpg
 
Getting my shine on today.

20160710_141306.jpg
20160710_141320.jpg
 
Oh man that looks like some good rubbin'! Some fine steel wool with some polish will make it pop real fast then a final buff with a wheel. But you def got her to the "fun part" so you may not want it to go so fast..:)..mmmmm...shiny

Can't wait to see what those little dealios are for.
 
Nice and shiny.
I agree with Chad, curious about the dealios.
 
Can anyone guess what they are?
 
Keep it Shinin' On

 
Oil lamp caps, candle snuffers?
They kinda remind me of old carbide lamps.
 
Got all of the rear half of the cast Duralium pieces polished. First pass that is. Still need to do the headtube and the forks.

20160710_165702.jpg
20160710_165711.jpg
20160710_165746.jpg
20160710_165814.jpg
 
20160710_130106.jpg
20160710_131945.jpg
 
A couple of you guessed what these little doodads are.
Last year I went to the kitchen and used a soup can.
This year I decided to try stepping it up to the dining room. These are salt shaker caps from old railroad dining cars. I've got a couple of ideas on where I might use a few of them.

20160709_193555.jpg
 

Latest posts

Back
Top