MBBO Savage B.O.B.

[CRASH]

Cut two 2” lengths of 5/8” stainless.

2” is too much. The othe bike pictures was an inch and a half, but that seems long. So 1” seems about right.

This tubing has a slightly smaller OD, so I’m going to try to find something closer.

 

[The Renaissance Man]

OK, here's my first thought.

Cut a corresponding plug out of stainless steel plate, cut the tubes at the appropriate angle and depth, weld the underside of the plugs to the tubes, then sand and polish smooth across the three surfaces.

Something like this: