Ok Chuck has these 3'' wide 26'' rims for sale. He made me a killer deal so I ran over to his house (close) and buy two. Still a killer deal. I bring them home and start to lace a 3 speed nexus to one. About somewhere into the lace I notice I have too many spokes. I checked the rim and BANG they are 32 spoke rims. So now my decision is to buy a hub with 32 holes or redrill the rim. I hate to wait on stuff to get here in the mail so I chose the drill more holes. They were so cheap I could waste one and if I decide to buy a hub for one I can still run a regular alloy front that is normal wide and build something with a really big back tire. Anyway I took a normal 36 spoke rim and measured the spacing and laid out the new holes. Well the rim I chose was bigger in diameter and the holes are a little farther apart than this rim. So I laid it out about ten times till it matched all the way around. I drill all the new holes and bring my lots of holes prize into the house with my spokes and Nexus three speed. I start to lace it and somewhere I noticed I now have 9 holes on each side....anybody need a rim drilled for 38 holes with lots of extras. This is one of those things that you know you messed up and it just kept getting worse, but its the most fun I have had in a long time. :lol: