Like Yogi Berra said, "If you come to a fork in the road, take it." (Yogi Berra, famous NY Yankee catcher, but even more infamous for his off-the-wall twists on cliche phrases). That fork is definitely high on the cool factor! 
Vaterland burrito
- Thread starter irzouts
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Wheels set. Torpedo 3 gears coaster brake.
The fork is too long ! I have to modify it to lower the frame and redo the rods.
It was a bending day.
It was a bending day.
Awesome high tech bender!
No need to bend the fork finally, it was a mistake, redoing the rods was the right thing to do.
Now the rear is almost done.
Now the rear is almost done.
Art on wheels. 
Even the floor looks like a work of art!
Even the floor looks like a work of art!
This bike just speaks ‘irzouts’. Awesome design...[emoji1363]
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Haha thanks !
The frame is almost finished
The frame is almost finished
MazdaFlyer
Like “RadioFlyer”
I don’t usually care for stretched bikes, but yours is pretty cool. The top tube chain seems out of place though, to me. Makes me want to get welding equipment.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sweet! Like it a lot!
Thanks !
Today I put the handlebar
Today I put the handlebar
Your vision is becoming reality quickly now! I love how the chainline runs through the frame. Bars are perfect too.
Last edited:
rebar handlebars sweet.
Carl.
Carl.
problems, problems...
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
Straighten it back out and add trusses from the top of the spring mount to the top of the steer tube.
Ouch, you know there is a problem when you can use your pedal as a kickstand without even leaning the bike a little.
@Trm you are probably right but I don't want to add truss for the moment
@ Yep,Beric ! The first rods I have made are probably better.
Here is a video to show you the reinforcement I welded at the back of the primary fork.
It works well now, but the down tube is too low, I will try with the first rods, I can add some spacer on the springs too to get higher.
@ Yep,Beric ! The first rods I have made are probably better.
Here is a video to show you the reinforcement I welded at the back of the primary fork.
It works well now, but the down tube is too low, I will try with the first rods, I can add some spacer on the springs too to get higher.
Shifter done
An old trowel handle was welded on the selector
An old trowel handle was welded on the selector
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
I like the handle!
New pedals special scrapping
