was given a 1'' threaded springer

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 14, 2014
Messages
9
Reaction score
2
Rating - 0%
0   0   0
hi all,
i was given a 1'' threaded springer fork and i'd like to try and make it work on my 1 1/8th threaded cruiser

i've been researching online and found some "reducer cups" made by different manufacturers...

does anyone have any experience with these types of things?

i realize i will have to get a new headset, but i think they are only like 10$ or so, so not really a big deal...

thoughts and ideas are welcome.

thanks!
 
Because the cups just take up the negative space, o u still need to put a head set in

As far as I know
 
Just got back from the LBS my bud owns,

Ordered up the following:
1 1/8 - 1" head set reducer cups

1" threaded headset
22.2-28.6 quill- clamp on thing (so I can use my piston stem)

Should all work out in the end!!

I'll post updates
 
Sounds like you're hooked up, just make sure you got a "normal" 1" threaded headset--- an "American"-standard 1" headset is oversized, and won't fit into the reducer cups. :113::thumbsup::113:
 

Latest posts

Back
Top