As it says: Looking for a wheel or the beginnings of one, 20" x 1.75" rim (for a 2.35" wide tire), going on an '80s MTB. Ideally with 16-tooth cogs on each side -- clearance in the rear is 125mm, but 130mm hub will work fine. Thank you!
-
If you have bought, sold or gained information from our Classifieds, please donate to RatRodBikes and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Wheel or hub, for rear 20x1.75 single-speed/flip-flop
- Thread starter leotaxil
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
If KevinM's deal doesnt work out,
Ive run a few Wheel Master MX-4000 SF, usually about $20 shipped on ebay. Still need to buy 2 freewheels. Finding a metric small freewheel in 16t may be interesting the whole point of the small side is to run smaller than 16.
2 16t are you running dual chains?
Ive run a few Wheel Master MX-4000 SF, usually about $20 shipped on ebay. Still need to buy 2 freewheels. Finding a metric small freewheel in 16t may be interesting the whole point of the small side is to run smaller than 16.
2 16t are you running dual chains?
