ORBO 26.0 X 27.5 Flyer

[MazdaFlyer]

The quail ornament had a 5/16” tapped hole in the bottom. So a bolt was test added.

I found a couple of stems as a mount idea. The BMX stem is heavy, so steel.
7/8” bar mount so it would fit the extended handlebar tube.

Also have the State stem I started with, the bar clamp is 1” so I would need to add a shim. I would probably cut it down if I used it. Thinking either one would be good solution, but the black aluminum one being the best. A Recycled hood ornament ought to be fairly rat rod on a bicycle.

Any comments?

 

[metalchewy]

I had a similar one on my first summer RRBBO bike, Hammered Higgins. Neither one have ever had a drop in them.

If/when you make it to Vegas for an OBC, or just to hang out we can remedy this. lemme know.

______________________

Personally I love this one.

 

[MazdaFlyer]

Tinkering with the hood ornament quail stem mounting today. I started with the aluminum stem without cutting it up. I used 5/16” NC bolt, washers, nuts and a couple of 1/4” fender washers, drilled out the hole to fit the bolt.

This mounting system would work with the BMX stem also.

 

[MazdaFlyer]

I test fit the mockup on the front bar. I’ll have to think about it for a while, not sure if it’s a keeper.

Received Cardiologists approval on Wednesday for upcoming Hernia surgery repair.

 

[Wayne]

Any comments?

I test fit the mockup on the front bar. I’ll have to think about it for a while, not sure if it’s a keeper.

Since you asked, what about having the bird riding on a short front fender? Of course to complete that look you would need a rear fender. That could be a short Stingray style rear fender.

 

[Pondo]

The bird is funky, I like it.

 

[OddJob]

Could it be attached to the actual stem in some way, and then kind of 'nestled' (bird pun intended) in the opening of the bars.

 

[MazdaFlyer]

I appreciate your approval. Not my typical rat rod build, oldest parts on it are the tires, chainring and crank arms.

Sometimes it's good for us 'seasoned' veterans to break our own molds once in a while. Applying rat rod techniques to newer frames and parts is cool, too.
[/QUOTE]

Seasoned is right, in more than one way. I’ve done several “new frame builds or personalized customs”. This one is more like a personalized factory concept.

That flask with mount is pretty cool!!

As previous I’ve used one on my first rat rod build off bike. The flasks have never been used, so no BUI’s yet.

If/when you make it to Vegas for an OBC, or just to hang out we can remedy this. lemme know.

______________________

Personally I love this one.
View attachment 288168

I’ve been there once, pretty glitzy place. No positive cash inflow overall.

Since you asked, what about having the bird riding on a short front fender? Of course to complete that look you would need a rear fender. That could be a short Stingray style rear fender.

That would work, but no fenders on this one. Thanks!

The bird is funky, I like it.

Thanks, 1930ish now 2025.

Could it be attached to the actual stem in some way, and then kind of 'nestled' (bird pun intended) in the opening of the bars.

Probably could be, or suspended like being in flight. May try the BMX stem which would shorted the projected look.

——————————————————
Thanks “All” for the input.
I should get the fork brake extender parts next week. Then I can hopefully get the front backup brake working, otherwise it’s an old school coaster brake.

 

[MazdaFlyer]

Ornament with BMX stem.

 

[MazdaFlyer]

BMX version mounted on front bar. @metalchewy might be right on the BMX look, it’s a little more compact. The other bar looked too stretched. Might paint the stem matte black. Bird keeps the 95+/-year old patina.

Getting cold again, more snow in forecast. Thinking that this build is mostly complete, at least about to go on hold.
——————————————————
I’m always amazed at how many views these builds all get. Then when the voting rolls out, the viewers all seem to disappear. Are there that many Bots watching what goes on?