BO15 Beiwagenmaschine Type II (finished)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I need more room in the frame back here for 26" wheels. Luckily I have a few pigs back here to shave some bacon off of. This should give my the extension I need and the reinforcement I need in the rear triangle
IMG_20200717_090712~2.jpg
 
You know how sometimes you are doing something and think, "Man, this is gonna be a really teer jerker for someone somewhere who Hass a pentiant for vintage Roadmasters." And it makes you smile "extra. Kinda mean way grin.
IMG_20200717_134438.jpg
IMG_20190815_235957.jpg
 
Welcome back from the dead. I like the way you did the rake with the diagonal cut to the old headtube. You should be able to use an OCC rear wheel to fit that Dunlop tire on.
 
If only they made tools like a measure length thing or a check if it's gonna be level thing. Whatever this will work it always does. Gratuitous petrol powered spectators laughing pic
IMG_20200717_144117.jpg
IMG_20200717_144315.jpg
 
Welcome back from the dead. I like the way you did the rake with the diagonal cut to the old headtube. You should be able to use an OCC rear wheel to fit that Dunlop tire on.
I missed you man I really did. i want to add a sidecar and use this old school (lmfao nos) Jared slick with these rusted triple drops in twisted spoke
three speed hd hand brake now. I checked the chainline on these 16" harley wheels and I can use them on something else with a center freewheel and disk brake mount to the the chainwheel I am pedalling ;-) . I could have pulled a lot more rake out of that set up too. I was thinking to myself it was pretty clever and repeatable when i did it. Using a couple sizes too big fork on these things is pretty common so I did it so someone else could later
 
Last edited:
Welcome back from the dead. I like the way you did the rake with the diagonal cut to the old headtube. You should be able to use an OCC rear wheel to fit that Dunlop tire on.
plus you know me, I am all about giving away all of my secrets
108824990_3392112804187249_7375205397386142885_n.jpg
 
I was tacking this in place when I ran out of wire. I just hammered the piss out of it to make sure everything is close gaps because I am totally going to use the China tool store wire that came
IMG_20200717_170837.jpg
IMG_20200717_170832.jpg
IMG_20200717_170827.jpg
IMG_20200717_170807.jpg
ed745093e8f7789950e065e840effe7d.jpg
with it here. Those three ..... tacks took a big fuggin hammering so whatever. Here we go... plus this 1946 part is curiously not as high quality as the 1940 parts so whatever
 
Last edited:
I just keep staring at the bus!
Westy" loves you too man. My fifteen year old daughter, my fifteen and one half and thirteen days it is time for her to get her learners permit or whatever, had her little "gifted and talented or advanced placement nerd burglar friends over to the house and they all decided they wanted to "clean up the Scooby van"
106615315_660961667818458_746819308621205827_n.png

they said. Me being a legit new balance wering clueless dad got all excited and ran into the house and got some sidewalk chalk and soap and water and stuff so they could have a good time "coloring on it". I walk outside they have already vacuumed it and took all of my hippy .... out of it and they just look at me like, "no big dummy, we mean drive it for the next three years and take a cross country adventure because we are all leggy little spoiled genius jerks and like beaches and parties now. (but I digress)
93486467_897332174045504_1982433539487956992_n.jpg

I mean I am not mad, I am just saying I did not see that one coming. Westy and Scoob are all for it though so whatever
28954163_1848180585247153_3361342686278510969_o.jpg

This her in the flashing red and blue thingy she totally busted me with and made me think I was getting pulled over back when she still liked sidewalk chalks
 
Last edited:
I'll tell you a funny story. Secrets: When these poop-a-doo-doos pulled out of Dallas all the "yellow bikes" were free real estate. Most of them went to a friend's charity but I saved a few I pulled from the scrapyard (Every crackhead in the metroplex was scrambling to scrap them) to build wheels with those hubs. I just happened to have a set of security bits and the spoke nipples are an odd size. Proprietary nothing you can order fits them. I have used them several times. The shifty guage spokes are just the right lengths to twist in a vintage hub as long as you do not lose a nipple. I mean we were buying them in bulk from the metal recycle places and taking them to the charity for the record
109537129_3392489430816253_1948090815197049913_o.jpg
109898165_3392478127484050_5722449441372436876_o.jpg
112720103_3392490187482844_3328804549906331928_o.jpg
 
Okay where was I? I ran out of wire just as I got this tacked in. I took the big friggin hammer to it and decided I was just going to use the Chinese wire that came with my hardor fright weldor. That was a terrible idea.
IMG_20200717_170827.jpg
IMG_20200717_170807.jpg
IMG_20200717_175409.jpg
 

Attachments

  • IMG_20200717_170807.jpg
    IMG_20200717_170807.jpg
    217.5 KB
Me trying to say I have just enough light left to finish drawing these last couple of beads
Kate: you have that light bar. I just saw it today
Me: there is like a monumental difference between what you can see out here and what I can see out here ginger all of the curves in the house and has her prescription glasses lady
110236682_3392730334125496_6995167664074175702_o.jpg
 

Latest posts

Back
Top