TRADITIONAL Jumpy

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I have never used that style hub, but have run into a few situations where the inner cable has ferrules in both ends making it impossible to replace the outer cable. My current build off bike has that issue with the brakes. I believe the Shimano positron also has that issue.
 
1721000357730.png


Are you sure you are getting a good measurement? Looks like the caliper is not on the carved end. 13/16" = 20.7 mm

This fits a Schwinn, 13/16"... with 7/8" top.


1721000599318.png


https://www.ebay.com/itm/165572008347
 
View attachment 273088

Are you sure you are getting a good measurement? Looks like the caliper is not on the carved end. 13/16" = 20.7 mm

This fits a Schwinn, 13/16"... with 7/8" top.


View attachment 273089

https://www.ebay.com/itm/165572008347
Thanks Wayne!!!!

I think you’re right !!! There’s the post part, then like a sleeve it goes into.
IMG_9432.jpeg


I measured the diameter of the sleeve with the post in it, and I think you’re right!

-I’m sure I have an old Schwinn seat post here somewhere…. Would that be a good test before buying?

My measurement looks super close, BUT, it’s like a $9 tool…..

IMG_9434.jpeg
 
Paint is looking good and love the new bars.
Just get a little bit done every day that you can.

The Waterboy GIF
 
Back
Top