LaidBack - TransWorld Motobike Rat - Patinafication & Details - 85 Years
- Thread starter MazdaFlyer
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
MazdaFlyer
Like “RadioFlyer”
Glad someone else likes the look, I still need to rough it up some. Thanks.
Hoping you’re right. Still some tweaking to do on it. I’ve got another set of tires to experiment with. I’ll have some time on Wednesday to see how it may look installed.
It pains me to mess up good fresh paint though. The acrylic is left over from the saddle “restoration” I did in BO#12, per your recommendation. I guess I’m 50/50 on the fun part. Thanks.Nice work on the fender aging technique. See, isn't ratty fun?
Thanks, I think it works pretty well myself. At least I’m putting some of my old reflectors back in service. The one in the middle is glass. I have an almost mint green glass one that I might trade out with the center one.
Sent from my iPhone using Tapatalk
MazdaFlyer
Like “RadioFlyer”
Another tire option, found on the cheap. Not sure they will fit but couldn’t pass up the deal.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
MazdaFlyer
Like “RadioFlyer”
Roadblock: The new bargain basement Retro Rides at 28x2.2 fit the wheels nicely but not the bike...bummer. I was afraid of this. The first set of fenders that I had on the bike accept the tires “tightly” like a glove.
It would make a nice static display...riding nah. The front hits the fender screw at the fork and that’s with out the axle even being completely in the dropout slot.
They measure out at 29”x2.2365”. I’m assuming the 28x2.0/700x50 wouldn’t fit either.
There is sidewall clearance for rotation. Back to experimental design and rethinking the final direction of this LaidBack TransWorld Rat.
Sent from my iPhone using Tapatalk
It would make a nice static display...riding nah. The front hits the fender screw at the fork and that’s with out the axle even being completely in the dropout slot.
They measure out at 29”x2.2365”. I’m assuming the 28x2.0/700x50 wouldn’t fit either.
There is sidewall clearance for rotation. Back to experimental design and rethinking the final direction of this LaidBack TransWorld Rat.
Sent from my iPhone using Tapatalk
Roadblock: The new bargain basement Retro Rides at 28x2.2 fit the wheels nicely but not the bike...bummer. I was afraid of this. The first set of fenders that I had on the bike accept the tires “tightly” like a glove.
It would make a nice static display...riding nah. The front hits the fender screw at the fork and that’s with out the axle even being completely in the dropout slot.
They measure out at 29”x2.2365”. I’m assuming the 28x2.0/700x50 wouldn’t fit either.
There is sidewall clearance for rotation. Back to experimental design and rethinking the final direction of this LaidBack TransWorld Rat.
Sent from my iPhone using Tapatalk
That sucks because they look great on there!
Yeah, real shame they don't fit. How is it in the rear then? Worse or better? If the rear works maybe another fork?
I vote for these tires, skinwalls really complement the red.
MazdaFlyer
Like “RadioFlyer”
Yah, I’m disappointed but that’s the way it goes sometimes. You just regroup and move on.
The picture of the tire in the fender is the rear fender. I didn’t bother to try the rear.
They are starting to look better to me also. I have one more option coming up to try that should fit a little better. I want to use the older fenders.
Sent from my iPhone using Tapatalk
MazdaFlyer
Like “RadioFlyer”
The tire deal torqued me off...so in my angry mode I masked off the tank. Forgot to take a before paint photo. I added a red perimeter outline stripe on both sides. This was an angry freehand eyeball layout.
Pretty pleased when I pulled the tape off...a good end to a frustrating day.
May add a couple of lines on top. Also have a couple of water slide decals to add.
Sent from my iPhone using Tapatalk
Pretty pleased when I pulled the tape off...a good end to a frustrating day.
May add a couple of lines on top. Also have a couple of water slide decals to add.
Sent from my iPhone using Tapatalk
Agreed ^ ! Skin walls give it that vintage look, with a touch of class.
Perhaps give it at least 'one more try' with a 700 c 'fattie'.
Agreed ^ ! Skin walls give it that vintage look, with a touch of class.
Perhaps give it at least 'one more try' with a 700 c 'fattie'.
+1 vote on that
Add my vote ; here.
MazdaFlyer
Like “RadioFlyer”
I decided to repeat the perimeter line on top of the tank.
Screwed up my tank paint. I used some “old” striping tape on top. Adhesive had gotten tacky, I forged on.
Ended up masking over the striping tape. Self etching primer didn’t do its job on the galvanized metal or I didn’t get it degreased. Anyway top of tank has adhesive residue and missing paint when I removed masking tape. I’d used automotive masking tape on sides with no issues. Live and learn.
Now to come up with a fix.
Sent from my iPad using Tapatalk
Screwed up my tank paint. I used some “old” striping tape on top. Adhesive had gotten tacky, I forged on.
Ended up masking over the striping tape. Self etching primer didn’t do its job on the galvanized metal or I didn’t get it degreased. Anyway top of tank has adhesive residue and missing paint when I removed masking tape. I’d used automotive masking tape on sides with no issues. Live and learn.
Now to come up with a fix.
Sent from my iPad using Tapatalk
Rust-Oleum autumn brown multi-color texture paint? [emoji16]
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
MazdaFlyer
Like “RadioFlyer”
Yes, maybe an opportunity to “age” the tank at his point.
Sent from my iPad using Tapatalk
So glad to see someone else promoting the 'aging' benefits of Rust-Oleum texture paint! My latest trick with that came from my mustard experience. I now apply it with a sponge. Better control in small areas, and not as much spray over.
MazdaFlyer
Like “RadioFlyer”
Still working on this. Need to try another set of tires. Pedals and seat are temporary, will probably put the chain guard back. Need to decide on grips and pedals based on final tires. And I need to fix the tank patina paint wise.
I did take it for a spin up and down the block. Pretty smooth for an 85 year old bike with new MIC wheels and 700x35c tires. The geometry even seems to work with my old “LaidBack” body.
Sent from my iPhone using Tapatalk
I did take it for a spin up and down the block. Pretty smooth for an 85 year old bike with new MIC wheels and 700x35c tires. The geometry even seems to work with my old “LaidBack” body.
Sent from my iPhone using Tapatalk
MazdaFlyer
Like “RadioFlyer”
Maiden Cruise on LaidBack TransWorld Motobike Rat video by Mrs MazdaFlyer.
Again bike Build isn’t complete...stay tuned!
Sent from my iPhone using Tapatalk
Again bike Build isn’t complete...stay tuned!
Sent from my iPhone using Tapatalk
Looks like you've got it geared right. Rolls right along! Always like to see a build on a test ride. 
