UNLIMITED Midnight Flash

[kingfish254]

I would go with just GOODYEAR or spoof it up like Dave Deal and go with GOODBOOT with a Playboy rabbit in between.

 

[Captain Awesome]

I'm going to add white letters to the rear tire. Owner likes Good Year, so that's what he's getting. So, opinion time. Good year makes a drag slick called the Eagle.

View attachment 267606

I'm going to use white letters, since yellow wouldn't really look right on this bike. So, here are the options:

1) Go with "Good Year" only.
2) Go with "Good Year"... and "Eagle".
3) Go with "Good Year" and the tire size on the facing side (20 x 3.0) [A lot of bikes showed tire size on their RWL tires]
4) Go with "Good Year" on one side, and ______________ on the other side. (Your option. "Drag Slick", or something like that)

Current top fuel model runs the Eagle designation

The sportsman models are without

 

[CRASH]

Cut the bridge off.

Going to move the bridge up just about an 1/8”, but taking up a little more room by setting the mount higher.

Set it and tacked it.

Then set and tacked the tab, then added a fender bolt through the hole and takes that in. Will give a cleaner look.

Next is to finish out those welds and smooth it all in.

 

[Pondo]

That tube isn't factory but it looks more right somehow.

 

[CRASH]

 

[CRASH]

You know, “Foreshadow” would have been a cool name for this bike.

 

[CRASH]

Interesting turn of events. As you know, this bike is being built to complement some show trucks and cars. A truck he is having built will be complete in July. This is the engine:

So this may affect some of the aesthetic of the bike. More to come…

 

[kingfish254]

 

[CRASH]

I may be delayed…. Can only work in the morning on weekends.

 

[Pondo]

Ugh

 

[CRASH]

I’ve had to focus on my other project so i don’t have much of an update. But this accessory came in, which will be cool once I figure out the mounting.

 

[kingfish254]

I’ve had to focus on my other project so i don’t have much of an update. But this accessory came in, which will be cool once I figure out the mounting.

View attachment 270438

Nice Spoiler Alert!!

 

[CRASH]

Unfortunately I don’t think I’m going to make deadline. I’ve lost too much time to the heat. I finally bought a swamp cooler, so we’ll see how that works in this 100+ degree heat. It’s supposed to be 113 next Saturday.

Anyway….

Had to cut off and fabricate and weld on a new rear fender mount. It was slightly off from our first attempt and I couldn’t allow that. So it’s done. The frame was looking rough because it’s been a while since I had it sand blasted.

So I took it to work and smoothed it out. I also took some time to smooth out the welds which weren’t done with the greatest of care.

 

[CRASH]

And I dropped the shifter internals at the chromer.

 

[Pondo]

It’s supposed to be 113 next Saturday.

Oofta! I thought it was hot here. Frame is looking good!

 

[OddJob]

Oofta! I thought it was hot here. Frame is looking good!

One of my all-time favorite 'church signs'.....

 

[Bike from the Dead]

I know what you mean about losing progress to the heat. It hasn't gotten as hot here in DFW or back home in Tulsa, but I just can't handle the heat like I used to. I might even have to drop out of the Build Off myself, or switch to a project that I can work on in smaller doses during the morning.

Glad to hear you're still making progress though! Can't wait to see that Huffy come together!

 

[kingfish254]

Sorry for the delays brother. I can relate to the heat, but ours is a moist heat. But at those temperatures, it just doesn't matter. Hot is Hot!!!