Monark Sparker

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I will ask the dumb question... Did you check the batteries?
I plan to install mine on one of my regular frames to see if it works. Maybe tomorrow.
That's not a stupid question..
Yes i used new batteries but the holder is pretty corroded, didn't get 6 volts.
Trying t find a way to get 6 volts from something else buy haven't found it yet😅
 
The seat is fixed!
I had this old Lepper seat laying around knowing that one day i would use it
Had to replace the seat bridge because i wanted to use the dropper post
Took another seat and used that bridge.
IMG_20210728_201144511.jpg
IMG_20210728_203735442.jpg
IMG_20210728_203754029.jpg
IMG_20210728_203750394.jpg
IMG_20210728_203801831.jpg

Also found some matching grips, haven't found out how to order them. The website isn't quite working.
2G50-26-19-c1_haupt-lenkergriff-leder_600x600@2x.jpg
 
The seat is fixed!
I had this old Lepper seat laying around knowing that one day i would use it
Had to replace the seat bridge because i wanted to use the dropper post
Took another seat and used that bridge.View attachment 166258View attachment 166259View attachment 166260View attachment 166261View attachment 166262
Also found some matching grips, haven't found out how to order them. The website isn't quite working.
View attachment 166279
Lekker bezig!
 
I got the electronic shifting working with some diy battery terminals made from a old headlight
IMG_20210729_210101734.jpg
IMG_20210729_210206963.jpg
IMG_20210729_210205229.jpg

I made a video of it but it doesn't seem to upload..
Anyway, change of plans.. It's just too big and bulky, i don't like how it looks
IMG_20210805_104821731.jpg
IMG_20210805_104826217.jpg

It messes up the lines of the bike.
So yesterday i orderded a suicide shifter and a pair of grips
 
I had a look at a few of my regular frames and I don't get how is it supposed not to be in the way of the crankset or the chain or the tire. It looks like there is a very good reason why they never took off.
I think colorwise it matches your frame, doesn't look bad at all at the chain stays.
I still haven't lost hope to install mine though. Otherwise I have to bother selling it, setting up a seller's account etc...
 
I had a look at a few of my regular frames and I don't get how is it supposed not to be in the way of the crankset or the chain or the tire. It looks like there is a very good reason why they never took off.
I think colorwise it matches your frame, doesn't look bad at all at the chain stays.
I still haven't lost hope to install mine though. Otherwise I have to bother selling it, setting up a seller's account etc...
The chain is supposed to go in front of the mounting bracket and underneath the unit. So it sits very high above the chainstay
Screenshot_20210805-125915.png


This is info from the Shimano techdoc
 
Grips: ✅
View attachment 167091
Motostyle grips with polished alu rings

Shifter: ✅
View attachment 167093
Having doubt for the placement of the shifter.
Option 1
On the rear stayView attachment 167096

Option 2
Front side of the frameView attachment 167095
What do you guys think?
PS i have these also...
For mounting the outer cable to the frameView attachment 167102
I'd put the shifter on the seat stay. It is more comfortable to use this way in my opinion :) On my daily bike it is placed there.
 
The seat is fixed!
I had this old Lepper seat laying around knowing that one day i would use it
Had to replace the seat bridge because i wanted to use the dropper post
Took another seat and used that bridge.View attachment 166258View attachment 166259View attachment 166260View attachment 166261View attachment 166262
Also found some matching grips, haven't found out how to order them. The website isn't quite working.
View attachment 166279
Rocking seat!!!
 
I like the seat stay choice, but is there any reason why it has to be mounted vertically?
 
Back
Top