MBBO Mongoose pit crewzer

[MONARKofSoCal]

I unfortunately never got to finish my donkey bike in the main build off due to many reasons
Main one being I couldn't get the bike to be 4 ft or less in length
Ironically at the same time I picked up this used mongoose zam bmx styled scooter to use at work
I removed rear hinge foot brake when I first used it so it's just an empty space on the frame

One of the things that I discovered about this frame is the fact that the frame is not fully welded

I think it was done to make it fight in smaller shipping boxes

Definitely not something that I want to keep using even if it's just back and forth from where I have to park
But it's the perfect platform to build something compact and donkey bike inspired

Here is the frame after being unbolted

I decided since I at some point want to still build my donkey muscle bike donkey Kong
I needed something to set this bike apart
Therefore I will be running an 18" rear wheel
Correct me if I'm wrong but I had read that one of the things that makes them pit bikes are having wheels smaller than 20"
Usually 16"

This bike will be using a tire 18x3

It's going to require removing 2 small brackets in order to clear but nothing major

Here you can see the rough mock up of where I am planning on putting everything
Total length is estimated at 40"
Just need to shorten that excess tubing from the middle

 

[MONARKofSoCal]

Got the 2 little bars cut away now I have a lil more clearance to play with

 

[Bike from the Dead]

Oh that looks like a ton of fun!

 

[MONARKofSoCal]

Got the middle cut out
Also put in a strong tie to keep frame together until I finalize the amount I want to narrow it
The distance between the bolts on the strong tie is 4"
I can cut out another whole inch but keeping it at 4" for now

 

[MONARKofSoCal]

Came up with this idea late in the weekend
Unfortunately I could only find one rear rack to use as a mock up
I thinking of using it to fill the upper gap between the seat and the front of the bike
I have other rear racks I can dig out this week or check my local co-op to find any that fit best

 

[MONARKofSoCal]

Picked up this made in Finland exercise bike for free
I think I can use some parts from it for this build while maintaining the cool looking frame for a future build
Should know sometime next week
Btw the wheel is solid steel not a kuel steel wheel cover like other vintage stationary bikes

 

[MattiThundrrr]

The bars could be fun to combine with a fork, turn them into "borks"

 

[MONARKofSoCal]

I think I may be able to cut out the seat post and bb from the exercise bike to use on the pit crewzer
Will need to get some measurements

Btw for anyone who is curious here is the tinturi stripped to the frame

 

[MONARKofSoCal]

I took the seat off the post and noticed the holes line up with ones from the bracket attached the bb

I flipped the post to see if I could maybe utilize the post and the bb for pit crewzer

 

[MONARKofSoCal]

Got the middle bb bracket cut out of the exercise bike
Probably the most workout that thing has seen in a while