TRADITIONAL SHAOLIN SPITFIRE (Wu Tang Forever)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Some parts for the 'secret project'.

20240608_201655.jpg
 
I'd like to run a bobbed rear fender. Debating running the Schwinn fender (most likely) or digging out a peaked chrome fender. I mocked up the front fender as a rear fender, then sprayed it with oven cleaner so it will match the frame. We'll see how it looks tomorrow.

20240613_203459.jpg


I also flipped the mounting bracket on the seat, so it sits a little higher (for fender clearance).

Still messing with handlebar setup. It may be the last thing I nail down. I want to mount a light (or two), and possibly a speedo. I may just build out all the accessories, THEN see how bars work with everything in place. I def need proper stanchion brackets for solid mock ups. Here's one idea...

20240613_210611.jpg
 
I'd like to run a bobbed rear fender. Debating running the Schwinn fender (most likely) or digging out a peaked chrome fender. I mocked up the front fender as a rear fender, then sprayed it with oven cleaner so it will match the frame. We'll see how it looks tomorrow.

View attachment 269468

I also flipped the mounting bracket on the seat, so it sits a little higher (for fender clearance).

Still messing with handlebar setup. It may be the last thing I nail down. I want to mount a light (or two), and possibly a speedo. I may just build out all the accessories, THEN see how bars work with everything in place. I def need proper stanchion brackets for solid mock ups. Here's one idea...

View attachment 269469
Very cool stance!
 
Hit the fender with 0000, then cleaned it with alcohol and dusted it with the glitter treatment. Forgot I was out of clear coat. I'll pick that up tomorrow so I can set the first layer, sand, then dust again.

20240617_000848.jpg


20240617_001013.jpg


20240617_001029.jpg


Now that I've worked out fittings and bracing, I tightened everything down on the fork and headtube. I can trim the cross bolt as well.

20240617_001808.jpg


20240617_001815.jpg


20240617_002017.jpg


Debating using an acorn on the end, or keeping the standard nut to keep the aesthetic of the rest of the hardware.

20240617_002313.jpg


20240617_002318.jpg
 
Last edited:

Latest posts

Back
Top