TRADITIONAL SHAOLIN SPITFIRE (Wu Tang Forever)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Some parts for the 'secret project'.

20240608_201655.jpg
 
Part 2 of 'secret project' parts. Part one was unsucessful, so...check and adjust.

View attachment 268895
Hmm, gasser ratrod valves? 🤩
I'm going to listen some Wu-Tang at my work today, you got me inspired. The Wu-Tang reminds me of that 90's DOS game "Shadow Warrior".
 
Those tires rock with the saddle and guard!!!
Big score right there.
 
I'd like to run a bobbed rear fender. Debating running the Schwinn fender (most likely) or digging out a peaked chrome fender. I mocked up the front fender as a rear fender, then sprayed it with oven cleaner so it will match the frame. We'll see how it looks tomorrow.

20240613_203459.jpg


I also flipped the mounting bracket on the seat, so it sits a little higher (for fender clearance).

Still messing with handlebar setup. It may be the last thing I nail down. I want to mount a light (or two), and possibly a speedo. I may just build out all the accessories, THEN see how bars work with everything in place. I def need proper stanchion brackets for solid mock ups. Here's one idea...

20240613_210611.jpg
 
I'd like to run a bobbed rear fender. Debating running the Schwinn fender (most likely) or digging out a peaked chrome fender. I mocked up the front fender as a rear fender, then sprayed it with oven cleaner so it will match the frame. We'll see how it looks tomorrow.

View attachment 269468

I also flipped the mounting bracket on the seat, so it sits a little higher (for fender clearance).

Still messing with handlebar setup. It may be the last thing I nail down. I want to mount a light (or two), and possibly a speedo. I may just build out all the accessories, THEN see how bars work with everything in place. I def need proper stanchion brackets for solid mock ups. Here's one idea...

View attachment 269469
Very cool stance!
 
Looking great. I like the stance as well as the riding geometry
 
Underslung apes are still a solid option. Fender turned out well, just need to give it a bronzing. Depending on how solid the mounting ends up, I will likely remove the braces.

20240614_204102.jpg


I mocked up a speedo, for looks, and I think I like it.

20240614_204205.jpg
20240614_204209.jpg
20240614_212835.jpg
20240614_212849.jpg
 
I kind of like the newer grips, Bobby. Rub some acrylic paint on a rag and rub them a bit for patina. They have a funkier look, and your build is definitely funky!
 
Hit the fender with 0000, then cleaned it with alcohol and dusted it with the glitter treatment. Forgot I was out of clear coat. I'll pick that up tomorrow so I can set the first layer, sand, then dust again.

20240617_000848.jpg


20240617_001013.jpg


20240617_001029.jpg


Now that I've worked out fittings and bracing, I tightened everything down on the fork and headtube. I can trim the cross bolt as well.

20240617_001808.jpg


20240617_001815.jpg


20240617_002017.jpg


Debating using an acorn on the end, or keeping the standard nut to keep the aesthetic of the rest of the hardware.

20240617_002313.jpg


20240617_002318.jpg
 
Last edited:
I want to make a comment about matching nuts, but I won't.

That fender treatment has me intrigued. Following!
 
Back
Top