That’s an interesting idea, I hadn’t even thought about that.
Single & Ready to Mingle
- Thread starter kram
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Your fender looks pretty much exactly the same. Though yours looks to be a middleweight fender, which would fit a little easier in my frame. Also, the fender on mine has flat braces that tend to be on older/prewar bikes. Westfield build some elgin bikes, so that very well could have been who made the fender.
Here is one that I have from @yeshoney along with what the triple ducktail version looked like on his "Paint It Black" build.
@kingfish254 oh yeah, I remember that build. I might try that out, but I don’t know if there’s enough good fender. You can’t really tell from the picture but there are three tears in the metal.
I don't think I've ever seen one of those single bar Schwinns before. That's pretty sharp, especially with the Quick Bricks and that finned aluminum tank! So far, everything's looking real good! I'm curious to see how you'll straighten out that Columbia springer fork. I've had one before that was bent back like that.
Not sure how I haven't seen this build thread yet! Wow! Neat frame, and I love the tank. I have never seen one of those frames.
How's this build coming along? One month to go baby! Bring it on home!
I think this bike might be dead in the water for this years build off. I really like this bike and will finish it, but my energy for this one has kind of vanished. With a two year old, work, and trying to finish up my hot rod I don’t have a lot left. I’ve been finish up other nearly finished bikes that have been in the way for the last couple of years so that I have more room.
This 50’s Hornet I finished for a friend.
I got this parts bin colson with thick bricks done last night and ready for speedweek out on the salt flats. Unfortunately, due to rain the racing is delayed for at least a couple of days.
Finally, today I finished up this 63 varsity that I’ve been tripping over. It’s got 700c wheels with a nexus three speed. The original shifter works pretty good with the nexus.
Look at that schwinn paint glow in the sun.
This 50’s Hornet I finished for a friend.
I got this parts bin colson with thick bricks done last night and ready for speedweek out on the salt flats. Unfortunately, due to rain the racing is delayed for at least a couple of days.
Finally, today I finished up this 63 varsity that I’ve been tripping over. It’s got 700c wheels with a nexus three speed. The original shifter works pretty good with the nexus.
Look at that schwinn paint glow in the sun.
Ok, ok, I’m not throwing in the towel just yet on this one. I got a lot of other projects done, so I’m going to try to finish this one. I don’t really have the time to make a jig to straighten the fork. I’ve tried out a few different one and I think this beehive springer might be the winner. It also has a patina this is a pretty close match. It gives it a little different look, but I think I like it.
I’ve also been think king that this might need black wall tires. So I did a quick photoshop mock-up. It looks a lot tougher with them, really changes up the look. I think I have a Jerald slick around here somewhere.
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
The beehive looks great!
The tires are a toss up to me. I'm a fan of Schwalbes as a general rule. But then who can argue with a Jerald slick!
The tires are a toss up to me. I'm a fan of Schwalbes as a general rule. But then who can argue with a Jerald slick!
Agreed. I like the look of both set of tires. I’ll pull out some black walls and mount them to get a better idea.The beehive looks great!
The tires are a toss up to me. I'm a fan of Schwalbes as a general rule. But then who can argue with a Jerald slick!
Beehive looks great. I like how the lines of the chrome spring mimic the tank fins.
The blackwalls mockup look good, but I like the creams better.
The blackwalls mockup look good, but I like the creams better.
The beehive looks great! I'm a black tire guy so love the look. Have you tried flipping the fork linkage to see how it would look?
Really dig your bike....
Really dig your bike....
@kingfish254 I thought the same thing about the spring mimicking the fins!
@Mr. Monkeyarms I’m probably in the minority, but generally I don’t like the look of these forks when flipped. I think they look more elegant in the stock layout.
I had a chance to mock up some black wall tires today. The rear is a Jerald slick and the front is an old schwinn typhoon cord. I’m really digging this combo quite a bit. I like that the rear is fatter and it gives it a slight big and little look. The cream tires are really cool but to me the black walls look more like a hot rod, and that’s the look I’ve been going for.
@Mr. Monkeyarms I’m probably in the minority, but generally I don’t like the look of these forks when flipped. I think they look more elegant in the stock layout.
I had a chance to mock up some black wall tires today. The rear is a Jerald slick and the front is an old schwinn typhoon cord. I’m really digging this combo quite a bit. I like that the rear is fatter and it gives it a slight big and little look. The cream tires are really cool but to me the black walls look more like a hot rod, and that’s the look I’ve been going for.
I'll admit, I really liked those cream-colored tires you had on before, but I can totally see the hot rod vibes with the slick and brick you've got mounted on there now. I also like how much meatier those tires look thanks to being mounted on black rims. Really adds to it, I think. That finned aluminum tank also fits right in with that theme. Reminds me of those classic flathead fords with the finned Edelbrock valve covers! And that beehive springer really fits right in with the paint and patina on the rest of the bike!
Side note: do they still sell those Jerald slicks? I need to get me one of those for one of my bikes.
Side note: do they still sell those Jerald slicks? I need to get me one of those for one of my bikes.
MattiThundrrr
Rattus All Terrainus
MattiThundrrr
Rattus All Terrainus
If you want Jeralds, you gotta be sneaky. They're at the tack shop, not the lbs
https://www.bigdweb.com/product/jerald+jog+cart+tire+26+x+2.125+slick+tread.do
https://www.bigdweb.com/product/jerald+jog+cart+tire+26+x+2.125+slick+tread.do
Last edited:
- Joined
- Jun 5, 2012
- Messages
- 571
- Reaction score
- 1,821
I really like how the beehive springer matches the ribbing on the finned aluminum tank
Any chance you have some vintage white rims with a patina that matches the rest of the white
I think those would look awesome with that jerald slick
Any chance you have some vintage white rims with a patina that matches the rest of the white
I think those would look awesome with that jerald slick
@Bike from the Dead , Like what @MattiThundrrr said you usually buy there from a tack shop. I think the company went under for a bit, but they ended up being bought. I've had the tire for a while and if I remember correctly I bought it directly from Jerald.
@MONARKofSoCal I've been thinking the same thing. I also would like to see what the cream tires look like on white rims on this bike. I have a couple pairs of tires that would match the patina pretty well, it's just a matter of getting them out of storage before the deadline. Though I might have some here that are skit-tooth that I could at least see what they look like. I'll keep moving forward and hope that I have a chance to get them. I guess at some point I've just got to pick something because there are endless possibilities of wheel and tire combos.
@MONARKofSoCal I've been thinking the same thing. I also would like to see what the cream tires look like on white rims on this bike. I have a couple pairs of tires that would match the patina pretty well, it's just a matter of getting them out of storage before the deadline. Though I might have some here that are skit-tooth that I could at least see what they look like. I'll keep moving forward and hope that I have a chance to get them. I guess at some point I've just got to pick something because there are endless possibilities of wheel and tire combos.
