WE ARE BOTH FINISHED!!! thatismytruck vs. ifitsfreeitsforme

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Re: thatismytruck vs. ifitsfreeitsforme

That's a tough decision, Ian :shock: The fenders look real cool with the Franks tucked in them, but they look cool without them as well :wink: If I had to vote, I would choose the fenders though :p

Skip, nice parts! :D I like the safety reflector :wink:
 
Re: thatismytruck vs. ifitsfreeitsforme

Hard to believe you got that for $99. That rack is epic.

I think I'm all set for parts, but thank you.
 
Re: thatismytruck vs. ifitsfreeitsforme

Worked on other stuff this weekend, but did take the time to pull apart the seat.

2012-08-12_17-33-28_961.jpg


Needs a little bit of derustification.
 
Re: thatismytruck vs. ifitsfreeitsforme

thatismytruck said:
the copper is peeking through from the plating process. On the right, the Spaceliner (higgins) crank has no copper showing. 15 year difference (give or take) in manufacture date. pretty big difference in process. I love the copper look. kinda tiger stripe looking.

I used to work in a plating shop back in the day, running a nickel handline. In layman's terms I did the whole process of chrome plating from cleaning to copper/nickel/chrome by hand. Copper plating is by far one of my favorite finishes on machine work. Too bad it's so darn soft. Sorry about hijacking the thread....

Carry on with the goodness that is the buildoff. 8)
 
Re: thatismytruck vs. ifitsfreeitsforme

Skip, putting your Polansky to good use I see.
 
Re: thatismytruck vs. ifitsfreeitsforme

yeshoney said:
Sorry Skip, did not get same in a Color Flow auction!!!

Joe

No worries.

Got any Spaceliner stuff? I want one of the finned chain guards for another build.
 
Re: thatismytruck vs. ifitsfreeitsforme

I'm thinking about lowering the rack over the rear fender with a cutout if I can. Sort of like the RRB auction bike, but with a fender.

Crude sketch of idea:
639bcc3f-6130-2baa.jpg
 
Re: thatismytruck vs. ifitsfreeitsforme

Ian,
I like where you are going with this build. I pick up my Monark on Friday and will start on it next week.

Not hijacking your post, but I am going to use this wheelset on it.

s25speedIH1.jpg



ifitsfreeitsforme said:
I'm thinking about lowering the rack over the rear fender with a cutout if I can. Sort of like the RRB auction bike, but with a fender.

Crude sketch of idea:
639bcc3f-6130-2baa.jpg
 
Re: thatismytruck vs. ifitsfreeitsforme

thatismytruck said:
No worries.

Got any Spaceliner stuff? I want one of the finned chain guards for another build.


The only pieces I have are a super nice sprocket with the hub cap. I also have a rear rack (no light box or reflector though. If you need that stuff LMK.

Joe
 
Re: thatismytruck vs. ifitsfreeitsforme

Ok, I did it. I cut up a perfect 1955 Monark rack.

I like the look:

63bc3022-a93d-b9a1.jpg


63bc3022-a949-b3ea.jpg


63bc3022-a954-b7c0.jpg
 
Re: thatismytruck vs. ifitsfreeitsforme

you said I had to use the fenders - so this is your fault.
 
Re: thatismytruck vs. ifitsfreeitsforme

ifitsfreeitsforme said:
Ok, I did it. I cut up a perfect 1955 Monark rack.

I like the look:

63bc3022-a93d-b9a1.jpg


63bc3022-a949-b3ea.jpg


63bc3022-a954-b7c0.jpg

SUH WEET! I'm wanting to do that too... it's just that everything for me has been long term in the project department. Ugh. I'm liking it, a lot. The wife has returned with more popcorn. Forge ahead.

Clark
 
Re: thatismytruck vs. ifitsfreeitsforme

ifitsfreeitsforme said:
you said I had to use the fenders - so this is your fault.

Why you little ....
homercokingbart.gif


You are really stepping up, little buddy. I now need to pull out another stop.
 
Re: thatismytruck vs. ifitsfreeitsforme

One half of my tank is rotted through. So I'm thinking of turning the hole into a faux air intake.

Remove rust:

63bc3022-1981-e1ba.jpg


Start shaping perforated metal:

63bc3022-19b8-b37a.jpg

63bc3022-19e4-4619.jpg


Now how to hold it in place is the question:

63bc3022-1a09-7a92.jpg
 
Re: thatismytruck vs. ifitsfreeitsforme

great idea!!!
 
Back
Top