CrapSeriously?
I was about to say you topped me
TRADITIONAL 🅵🅾🅾🅻🅸🅶🅰🅽 - 1930s Elgin Oriole - 2nd Place (Tie) - BUILD JOURNAL
- Thread starter kingfish254
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
I was about to say you topped me
Yes, the Evans 'baseball bat' guard had me skeptical, but consider me a believer.
These are what I meant by ... bolts. It is what you use to squeeze the moon discs on the rim.
The jam nuts was bigger than I needed, so I settled for a washer on one side to give the needed clearance between the fork and the moon disc.
The jam nuts was bigger than I needed, so I settled for a washer on one side to give the needed clearance between the fork and the moon disc.
Thank you for clarification of the ... bolts you're using. I did not want to see results of an online query.
I just had to look. Kinda disappointed. 
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
Loving the build so far. You picked the fork that I liked early on. Nice matching tank, love the seat. The moon disc is great. 
almost 500 posts and already about at the halfway in the buildoff on track for 1000 posts.
almost 500 posts and already about at the halfway in the buildoff on track for 1000 posts.Man, those Moon disc's really are going to top that off with some real flash.
As I expected with this wide wheelset, I ran into issues with the mooneyes. I even searched back in @marshall hudson 's Rollin Bones build a few years ago to refresh my memory of his moon disc issues.
You can see here that the rear disc has one that is flatter that the others. This is meant for the drive side. It 1/2" flatter than the other discs. That was the side that gave marshall issues.
The flatter one actually fit well on the drive side.
However, on the non drive side, the disc stuck out a good bit beyond the mounting for the coasterbrake arm.
You can see here that the rear disc has one that is flatter that the others. This is meant for the drive side. It 1/2" flatter than the other discs. That was the side that gave marshall issues.
The flatter one actually fit well on the drive side.
However, on the non drive side, the disc stuck out a good bit beyond the mounting for the coasterbrake arm.
I tested the discs on the skinnier 30mm (as opposed to the 40mm aerovane rims). The drive side was good, but the other side was still below where it needed to be for the coaster arm.
I'm afraid to try rims any narrower due to the thick bead on these fat tires.
Gonna head over to my stash to look for options.
I was expecting to be in a dilemma of having to choose between these beefy tires or the moon discs, but I think I may have found a wheelset that gives me both. We'll see. Initial testing of the discs with the wheelset at the storage unit look promising.
I'm afraid to try rims any narrower due to the thick bead on these fat tires.
Gonna head over to my stash to look for options.
I was expecting to be in a dilemma of having to choose between these beefy tires or the moon discs, but I think I may have found a wheelset that gives me both. We'll see. Initial testing of the discs with the wheelset at the storage unit look promising.
This is the wheelset that zi found. I got these from @pvwacko back when he was moving from Jacksonville to the west coast. Similar to when @Wildcat moved from JAX, I was able to buy all of his leftover bike stuff.
The current Aerovane wheelset is 40mm wide. This wheelset is actually wider at 43mm. But I think the saving grace for my application is this has a nexus 3 speed hub which is wider than a standard coaster hub. That extra width looks like it will translate into clearance of the moon discs. We shall see.
The current Aerovane wheelset is 40mm wide. This wheelset is actually wider at 43mm. But I think the saving grace for my application is this has a nexus 3 speed hub which is wider than a standard coaster hub. That extra width looks like it will translate into clearance of the moon discs. We shall see.
Ran into the same issue when I made my hubcaps, last build. However, I was able to cut the hole a little wider and massage a dimple into the hubcap for clearance. Yours is quite a bit more challenging, as it's a smooth prefab.
First test on the new Jetset front wheel looks like I have good clearance. May possibly need a spacing washer like on the current front wheel. I guessing that I will replace the qr axle with a solid one.
On the drive side, the dust cap is about 7-8mm wider than the hole in the flatter moon disc. I don't have an issue with grinding out 4mm of the inner diameter of the disc because it will be covered by the sprocket anyway.
On the brake arm side it clears, but I will probably grind out a couple of 3-mm to make sure there is good clearance here as well. I don't want anything binding.
Cool! Mo fatta. Mo Fitta and 3-speed. Bonus!
This is looking promising so far. I guess the next step is mounting up the tire and seeing if the wider rim and hub pose any clearance issues on the frame.
True, I hadn't even thought about that part yet. If it works, I'll have to play with shifters. Cool!
I remember that. I don't mind opening the circle some, but I don't think I would try and dimple these moonies.
True, I hadn't even thought about that part yet. If it works, I'll have to play with shifters. Cool!
Ran into the same issue when I made my hubcaps, last build. However, I was able to cut the hole a little wider and massage a dimple into the hubcap for clearance. Yours is quite a bit more challenging, as it's a smooth prefab.
I remember that. I don't mind opening the circle some, but I don't think I would try and dimple these moonies.
I'm actually pretty stoked about being able to use this wheel from Paul. It will be hidden by the moonies, but I love using parts from my RRB friends.
I thought you might only be going with the front moon disked.
You could of been known as 'Half Moon Fooligan'.
You could of been known as 'Half Moon Fooligan'.
Man these look good on this Jetset rims. We'll see how they fit on the bike.
Tire width on aerovane 40mm rim = 67m.
Tire width on jetset 43mm rim = 71mm
Not sure if I have 4mm to spare on the fork, so I may run mismatched rims.
Tire width on aerovane 40mm rim = 67m.
Tire width on jetset 43mm rim = 71mm
Not sure if I have 4mm to spare on the fork, so I may run mismatched rims.
