I kind of like the no brand hub with the slotted sides. Just a bit of a different look.
Brazen 🔥 (Finished)
- Thread starter metalchewy
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
After re-analyzing my drill plan on the wheels, I ecided to use the original marks. Double checked each one and used a fence to drill the holes out.
Worked out pretty well. No bit wandering like I had on the 7 speed hub.
I thought long and hard about rustifying these aluminum wheels with paint... ... then thought, hmm I've always wanted to vinly wrap a wheel.
After more thought I ordered some vinyl. Will size it up and decide soon.
Next up for this build, mark the circle and drill out one of those two front hubs. Stray Kats Ride is needing some attention soon.
Worked out pretty well. No bit wandering like I had on the 7 speed hub.
I thought long and hard about rustifying these aluminum wheels with paint... ... then thought, hmm I've always wanted to vinly wrap a wheel.
After more thought I ordered some vinyl. Will size it up and decide soon.
Next up for this build, mark the circle and drill out one of those two front hubs. Stray Kats Ride is needing some attention soon.
- Joined
- Apr 26, 2020
- Messages
- 1,637
- Reaction score
- 5,370
me too.
Marked up the front hub and punched it.
Then drilled it.
Then went to the LBC "The Vault" to get bearings for the headset. I had nothing that small. Found an essential park tool, BO-3. Lost the last one I had somewhere on a night ride downtown.
Lots of classic musicle and BMX inside and old steel outside. There was even a penny farthing inside. Only took the one pic.
Then drilled it.
Then went to the LBC "The Vault" to get bearings for the headset. I had nothing that small. Found an essential park tool, BO-3. Lost the last one I had somewhere on a night ride downtown.
Lots of classic musicle and BMX inside and old steel outside. There was even a penny farthing inside. Only took the one pic.
Diggin' the BO-3. I have the big brother, BO-1 but the keychain version.... 
Maybe I should sell mine to help fund my build; some dude is asking $45 for a Park Tool BO-1 on the 'bay.
My hands don't envy that wheel lacing job ahead of you! Looking forward to it!
RaT oN~!
Maybe I should sell mine to help fund my build; some dude is asking $45 for a Park Tool BO-1 on the 'bay.
My hands don't envy that wheel lacing job ahead of you! Looking forward to it!
RaT oN~!
Cool. That big brother looks more trim than the BO-2. Now you need the PZT-1 to go with it for your next pizza partyDiggin' the BO-3. I have the big brother, BO-1 but the keychain version....
Maybe I should sell mine to help fund my build; some dude is asking $45 for a Park Tool BO-1 on the 'bay.
View attachment 231952
My hands don't envy that wheel lacing job ahead of you! Looking forward to it!
RaT oN~!
. Hoping the lace job won't be to bad. The left hand is the one hurting these days. At least I planned ahead do deal with Arthir. 0 cross is the simplest and less painful than 4 cross when the hands are sore.
Sanding and me haven't been friends for a few years now.
The holographic vinyl came today to wrap the wheels with. Looks shiny brassy in the shadows,
but is a bit hot pinkish purple in the sun.
Having mixed feelings on it. Gonna ponder on it until the last spokes come in tomorrow and then decide...
but is a bit hot pinkish purple in the sun.
Having mixed feelings on it. Gonna ponder on it until the last spokes come in tomorrow and then decide...
I like it. It will be flashier than the brass on the frame though.
The wife said I can put the vinyl on her wheels. She wants me to repaint the maroon parts anyhow.
Wasn't planning to take the wheels apart, but will do so when I take the fork off it.
It will actually match well. I can even add some vinyl flames for the top bar and the lower bar behind the bottom bracket.
Gonna try some variegated leaf on the wheels. Supposed to be here tomorrow. Will see how it goes.
For the fork, lMe and the miracle dog have been thinking about cutting off the arms of one if these forks and welding it to the top of another. Then can bend it out a bit more to fit the strut rods and be at the right ride height... .
Last edited:
So, they would be welded on the outside of the existing fork to create more tire width as well?
All 3 of them will fit a 57mm wit 2.35s on it, so I was thinking of just making the crown of the fork an inch or so taller. And probably bent out 2 or more inches forward.So, they would be welded on the outside of the existing fork to create more tire width as well?
- Joined
- Aug 27, 2022
- Messages
- 948
- Reaction score
- 1,947
looks great Chewy! love that wrap! ive never ventured into wraps but that colors got me thinkin!
Thank You.
I will let you know when I apply it to those gold wheels. That might be in September but I suspect it to be sooner.
There are a lot of colors for Vinyl. Metal, camo, solid color, etc. Glow in the dark, reflective, holographic, rusty patina and more.
Mother's day afternoon, and I'm the regular cook of the house. Happy Morthers Day to those of you that are 
.
Seafood specials at Albertsons today. I'm the cook of the house and will be steaming these up tonighr...
For tomorrow or the next day. The foil leaf arrived and will be taking care of it soon.
.Seafood specials at Albertsons today. I'm the cook of the house and will be steaming these up tonighr...
For tomorrow or the next day. The foil leaf arrived and will be taking care of it soon.
Looking forward to seeing the foil leaf on those rims!
How about one for today?
About 2 hours after work to gild 14 leaves onto one rim
Hung it from the hook the kitchen light is usually hanging from and hooked two bungees to hang the wheel from.
First started one leaf at a time and then put more on, brushed it down with the dry brush
Then cottonball to help smooth it a bit more and remove any of the folded foil.
Even the origin 8 label shines thru
Extatic or how well it turned out. Wait a day ot two and can start layering on some.clear coat to seal it.
How does it hold out to the elements ?
