STBO Good & Plenty

[Flying Merlino Brother]

Pulling on the cable does alter shifting and braking, so I highly anticipate adjustments to solve the trouble.

Currently the OG hub and OG indicator are connedcted to the OG shifter but waiting on cable guides and a trip to the hardware store to attach these to the frame. However, I will need to lengthen the cable.

 

[twojs.bike]

That is probably the exact dangerous thing we are talking about. The gears aren’t engaged therefore no brakes when back pedaling. You could possibly get that fixed by getting the cable adjusted properly, but the condition could come back.

I had similar issues with coaster brake SA 3 speeds. I don’t use them anymore. The SA AW hub is bulletproof, but requires the addition of rim brakes.

 

[Flying Merlino Brother]

Thank you all. Could this be why three speeds have front brakes?

 

[Flying Merlino Brother]

Baja. Bicycles. Bears. Beets. Battle Star Galictica.

System reboot.

A supportive wife and many other awesome conditions lead to first things first. Wifi extender stuffed in the eve of the house makes it to the garage via hot rod television. Less than 100.00 spent. I know it might be korny but...
...b l e s s e d and g r a t e f u l.

 

[Flying Merlino Brother]

Hello Amigos. Looking for advice or links on choosing a length for the cable for initial placement of the crimped end. If it is a previous link, I'll find it.

Grips I love but too long. Might not work out but not opposed to trimming them either.

Can't hold it against me for the path of least resistance, right?

 

[twojs.bike]

I learned how to do this from BikemanforU on YouTube.



It also looks like you are missing this cable guide thingy. This is important.

 

[Flying Merlino Brother]

I learned how to do this from BikemanforU on YouTube.
It also looks like you are missing this cable guide thingy. This is important.

Thank you! I have the 'thingy', I'll pay particular attention. BTW I am driving to Harrisonburg, VA next week for a meeting. I'll beep as I drive by!

 

[Flying Merlino Brother]

Sturmey Archer 3
Ed, Eddie and Edward 1

Close but not there yet.

 

[Flying Merlino Brother]

Sturmey Archer 7.
Ed Eddie and Edward -3

One more try and I'll seek professional help... from the LBS.

Silver Lining: more appropriate grips that are a better length and allow better shifter placement. In stock from BMX for parts. Mo' bettah'.

 

[Flying Merlino Brother]

Waiting on a new cable termination for the final attempt at the three speed so I spent the day waxing the Tour X and the wife's Rav4.

Happy to share tha a new battery, fresh fluids and new fuel line the ZR was up and running. Now to sell it or find a 250 to 400 cc enduro. A 125cc Mad ... would do too...

 

[twojs.bike]

What problem are you having with the 3 speed?

 

[twojs.bike]

It is also worth checking that you have the correct indicator chain. If it was ever replaced with the wrong size, it won’t shift right.

You need the mark II which is 56mm from base of threads to shoulder.

https://www.sheldonbrown.com/indicators.html

 

[twojs.bike]

What problem are you having with the 3 speed?

Never-mind. I must be suffering from short term memory issues!!!

Just watched your video again. I would say it is one of 4 things.

-cable tension off , causing the gears to be in a neutral position.

-wrong indicator chain

-hub needs to be flushed to remove dirt and corrosion

-something is broken and it needs to be rebuilt.

If you haven’t already done this, flush the hub with wd40. A ton! Take the indicator chain out, and spray it into the hollow axle. It will drain out of the oil port. Put chain back in, work the gears, and repeat. This usually helps a lot.

Check the indicator chain length with the help of Sheldon brown

Adjust cable tension. Should be barely slack in the low gear.

If that doesn’t work it is time to rebuild or replace. But again, those 3SC hubs are not reliable. I wouldn’t trust it without a hand brake.