Headlight and Tail Light Gallery - Post Pics Here
- Thread starter kingfish254
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
My Felts,El Guapo and 1903.
Here is a simple LED eyelid light I disassembled and attached to a customers front fender. What I thought would be a 15 minute task turned into almost two hours. I had to drill out the rivets in the bottom of the light to remove the mounting bracket, then I had to make a template for the 4 holes in the bottom of the light, then had to center the template on the underside of the fender, drill 4 holes, and finally get 4 tiny screws, washers and nuts to line up, not easy withe the curvature of the fender.....frustrating to say the least, but it turned out ok.
jd56
It's all about the tanklights
Old school McGiver headlight. When in need, make do with what you can I guess was the moto back then in the 30s and 40s
Still I don't think I'll change a thing.
Cleaned up a bit
It's all about the Tanklights!!
How did I run out of room so fast?
Still I don't think I'll change a thing.
Cleaned up a bit
It's all about the Tanklights!!
How did I run out of room so fast?
Last edited:
Quite unique.
I put this one on "The Speedster."
Here is the full build link for "The Speedster." The Need for Speedster http://ratrodbikes.com/forum/index.php?threads/the-need-for-speedster.92619/ via @ratrodbikes
Last edited:
Sent from my iPhone using Tapatalk
12V lighting system. Motorcycle LED headlight with high/low and trailer brake light. A lithium ion battery for the headlight hides in one of the pockets of the frame bag and the tail light's battery is under the rear fender. Low beam is good enough for riding through the woods on a moonless night.
First time poster here. I somehow became an Electra Hub Bike collector / restorer / mod guy So here's my solution mounting a Harley 5.25" fog lamp to my very first craigslist Rat Fink BEATER of a bike. Originally had failing 3 speed hub, bent cranks, horribly failed/chipped powder coating, etc. I chose Prismatic Powders Illusion Malbec for the powder coat... new cranks... new hub.. seat... handlebars... tires. After failing to find a suitable fork brace with proper clearance I had our talented 3D tech at work design & mill this part from plastic. Later we'll do an aluminum version 
Oh... I found a drop in 9v-24v LED H4 lamp replacement from China.. then wired 2 rechargeable lithium 9v in series for 18v. This gives me nearly 2 hours run time. I also ran a pushbutton switch in the original hole for the wires that exit near the mount.
Oh... I found a drop in 9v-24v LED H4 lamp replacement from China.. then wired 2 rechargeable lithium 9v in series for 18v. This gives me nearly 2 hours run time. I also ran a pushbutton switch in the original hole for the wires that exit near the mount.
Patina matched this one to go on my '37 Roadmaster. I've got a tower led bulb soldered up and got a Seiss battery tube for many hours of run time. Got some cloth covered wire on order to make the connections.
Trying out a generator set up.
Using a tower led I found at a truck stop. (No truck stop jokes please
)
Lights up pretty good.
Post connector cost me a penny.
Hooked everything up with some reproduction cloth wire.
Last edited:
Latest posts
-
-
RRB member ifitsfreeitsforme could use some prayers and support- Latest: Captain Awesome
-
-
-
-
-
-
-
-
