iAM Higgins

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Shot the base color on the tank a few minutes ago.
I tweaked the bracket to get "T" light to fit on the back. Not quite sure if I like it there.
ImageUploadedByTapatalk1400010923.948472.jpg
ImageUploadedByTapatalk1400010955.965471.jpg

I think the battery compartment works OK.
ImageUploadedByTapatalk1400011035.179007.jpg

I also put the headlight on.
ImageUploadedByTapatalk1400011167.367919.jpg
ImageUploadedByTapatalk1400011357.348978.jpg

After looking at the frame in the sun for a while I'm thinking I'd like to add the tan line to the fender perimeter. I'm not a striper and can't see masking it all.
Does anyone make masking tape with a pullout center section ? Or a vinyl tape that let's you paint the center then remove the mask?
 
I've never used it, let me know how well it works if you try it.

Rg
42 feet of the design I would use for 9 bucks and change, worth a try I think.
 
Battery pack parts...going to have to do some cutting and hacking.
ImageUploadedByTapatalk1400030598.977612.jpg
ygezeruz.jpg

May have forgotten about that...
 
Last edited:
42 feet of the design I would use for 9 bucks and change, worth a try I think.

That stuff looks pretty cool and judging from the pics in their "how to", it has been around since the 80s. You could easily sell off the remainder of the roll here.
 
Took the battery compartment apart, removed the press disc and cut the screw shaft short.
ImageUploadedByTapatalk1400091853.657961.jpg

I figured out the wiring, photos will follow later. Good paint day so I painted the cookie press battery holder to match bike.
ImageUploadedByTapatalk1400091998.922386.jpg
ImageUploadedByTapatalk1400092015.854939.jpg

I then prepped the tank halves and added the Navajo White.
ImageUploadedByTapatalk1400092159.105253.jpg
 
Good progress.
Are you going to be able to make the handle on top of the can become the switch somehow?

Luke.
At the present I have a pushbutton switch in the bottom of the canister. This was the quick solution to test wiring and operation. My goal is still to make the screw handle the switch operator. Got to study this awhile, have plenty of time. Want to use the frame as conductor but have two wire system involved at present.
Added Paprika color to tank.
ImageUploadedByTapatalk1400100897.550787.jpg

To be continued...
 
Back
Top