This Build is sorta dead in the water for now...and it’s icy cold here at present so I worked out a parts list.
Faux Pedersen Ortho Part List:
—————————————
1. Virtue Ortho Frameset with bottom bracket and bearing caps, shipping damaged. Origin8 mountain bike fork.
2. Fork Extension - Home Depot and Ace Hardware: 5/8” threaded rod, nuts, washers, connectors, set screws, sleeves, thread Locktite,
3. Truss and Tension Rods - Home Depot and Ace Hardware: galvanized angle brackets, 5/16” CRS rod stock, 5/16” U-bolts and eye bolts, nuts, washers, connectors and Simpson structural T-bracket.
4. Recycled 1” seatpost section used with fork assembly.
5. Metropolis bars, 1” oversized Viking stem, 1” Sunlite threadless headset, Ergon Slim grips.
6. Prowheel 46T square taper crankset, Origin8 BMX pedals.
7. Tektro 319A linear pull brake levers, Tektro 930AL V-brakes.
8. Jagwire brake cables and housing.
9. Rideable Bicycle Replica hairpin saddle and Origin8 layback seatpost and clamp. Old recycled leather ranger belt.
10. Jim Blackburn tubular rear rack with Sunlite extensions and an antique store large jeweled reflector.
11. Bell cruiser bicycle chain.
12. Wald Kickstand.
13. AXA vintage style LED head light. Blue reflectors from
@sdframe.
14. 26” HBBC single speed coaster wheel set.
15. Continental Retro Ride 26”x2.0” brown tires, Goodyear HD tubes, .45 cal casing caps.
16. VOODOO headbadge.
The parts and components used in this Build are a mix of used, new, recycled parts. Some were purchased, some were gifted, some were modified/fabricated and some came from my parts stash.
